Instruction Manual

Appendix
Recovery and Utility tools
Note: Recovery and Utility tools may not be available on your system depending
on the region from which the system was shipped.
Diagnostics tool: The Diagnostics tool is designed for use by IT professionals. It is not likely you
will need to use this tool. If you should need to use this tool, perform the following steps:
1. Press the Diagnostics Tool button to start the Diagnostics tool.
2. Read th e note, and then click OK.
3. Choose on e or more of th e following options for diagnostics on the F ujitsu Hardw are Diagnostics
Tool window: CPU, Memory, Display, Hard Disk, CD/DVD/BD, Floppy Disk, Keyboard, and Mouse.
4. Click the Option button in the Tool menu to spe cify how many times the tool
should run diagnostics on each selected compone nt.
5. Press Execute to start the Diagnostics to ol.
6. After the execution is completed, the selected components are circled in red to indicate that they
have been diagnosed and the result dialog window o pens. Click Close to close the window.
7. Click End to close the Diagnostics tool, and then click Yes to con firm the end of diagnostics session.
Recovery tool: The Recovery tool contains two options:
• Restore C Drive: Restore recovery image (only C: drive)
• Restore Full Hard Drive: Restore recovery image (full hard drive).
You can use these tools to restore the Recovery Image from the hidden partition, and perform a full
hard drive recovery. Please refer to instructions above for details on how to create a Recovery Image.
Restore the Re
covery Image f rom Hidden Partition
1. Click [Restore C: drive] from Recovery a nd Ut ility tools
2. The progress
bar is followed by “Restore Recovery image (only C: drive)” screen
confirming t
hat the Image will be restored to the C: drive. Click Next.
3. Read the instruction screen and select Agree, then click Next.
4. Click OK to
acknowledge the warning message to restore recovery image to the C: drive .
5. When the pro gress bar appears, wait for the process to complete.
6. Click Fin
ish when the process completes; the computer will restart to Windows.
7. Follow the steps listed in the “Auto Installation support for software packages
from hidden partition” section.
8. Downloa
d FSDM (Fujitsu Software Download Manager) from the support site and download
all the
software applicable to the model and OS using FSDM.
9. Follow the ste ps listed in “Auto Installation support for software package s
downloaded from support website” section.
116 Fujitsu