Operating Manual FUJITSU Tablet STYLISTIC Q775 System
Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000 "http://solutions.us.fujitsu.com" "http://solutions.us.fujitsu.com/contact" Have a question? Email us at: "AskFujitsu@us.fujitsu.com" Copyright © 2015 Fujitsu America, Inc.
FUJITSU Tablet STYLISTIC Q775 Operating Manual Declarations of conformity 7 Fujitsu Contact Information 8 Ports and controls 10 Important notes 14 First-time setup of your device 18 Working with the Tablet PC 23 Accessories for your Tablet PC (optional) 46 Security functions 66 Connecting external devices 77 Settings in BIOS Setup Utility 81 Troubleshooting and tips 84 Technical data 93 Manufacturer’s notes 99 Declarations of conformity 102 FCC and IC Regulatory Information 103
Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.
Contents Contents Declarations of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Fujitsu Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 9 Ports and controls . . . . . .
Contents Removing the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting a SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing a SIM card . . . . . . . . . . . .
Contents VGA monitor port (only performance docking cradle, keyboard docking station or power keyboard docking station) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to remove USB devices correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Intermediary VESA Mount Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hand strap (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shoulder strap (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Folio case (optional) . . . . . . . . . . .
Declarations of conformity Declarations of conformity DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Address: Telephone: Declares that product: Fujitsu America, Inc. 1250 E. Arques Avenue Sunnyvale, CA 94085 (408) 746-6000 Base Model Configuration: STYLISTIC Q775 Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference.
Fujitsu Contact Information Fujitsu Contact Information Service and Support You can contact Fujitsu Service and Support in the following ways: • • Toll free phone: 1-800-8Fujitsu (1-800-838-5487) Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.
Fujitsu Contact Information Notational conventions Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information which is required to use the device properly.
Ports and controls Ports and controls This chapter presents the individual hardware components of your device. It gives an overview of the indicators and connections of the device. Please familiarize yourself with these items before you start to work with the device. Front (device option without palm vein sensor) Depending on your selected device option, the Tablet PC may be equipped with a palm vein sensor on its right side, see “Right-hand side” subchapters on the following pages.
Ports and controls Left-hand side 1 1 2 3 4 5 6 = = = = = = 2 3 4 5 6 7 8 9 7 = Micro HDMI port 8 = Storage card slot (micro SD, protected by cover) 9 = SIM card slot (micro SIM, protected by cover) Security Lock device DC jack (DC IN) Tether eyelet for stylus tether Power-on indicator Battery charging indicator Wireless indicator Right-hand side (device option without palm vein sensor) 1 1 2 3 4 5 = = = = = Shortcut button Decrease volume button Increase volume button ON/OFF button USB por
Ports and controls Right-hand side (device option with palm vein sensor) 9 6 3 4 7 8 5 2 1 1 2 3 4 5 12 = = = = = Shortcut button Decrease volume button Increase volume button ON/OFF button USB port (USB 2.
Ports and controls Rear (2 options: without screw holes or with screw holes and Smart Card reader) 1 7 43 2 5 1 5 5 7 2 43 5 6 1 2 3 4 5 = = = = = Fingerprint sensor Camera light Webcam Webcam LED Screw holes (device-dependent) for securing accessories Fujitsu 5 6 = SmartCard reader (device dependent) 7 = NFC (Near Field Communication) (device-dependent) 13
Important notes Important notes Notes Importantnotes This chapter contains essential safety information which must be followed when working with your Tablet PC. The other notes provide useful information about your Tablet PC. Safety instructions Information, Safetyinformation Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below. Please pay special attention to the sections in the manual marked with the symbol on the left.
Important notes Additional safety notes for devices with wireless components Wireless LAN Bluetooth,Safetynotes components If a wireless component (Wireless LAN, Bluetooth, 4G) is integrated in your Tablet PC, you must be sure to observe the following safety precautions when using your Tablet PC: • • • Switch off the wireless components when you are in an aircraft or driving in a car. Switch off the wireless components when you are in a hospital, an operating room or near a medical electronics system.
Important notes Traveling with your Tablet PC Mobile operation TabletPC Transportation Notes Please follow the instructions below when traveling with your Tablet PC. Before you travel ► Back up important data stored on your hard disk. ► Switch off the wireless component for data security reasons. With data traffic via a wireless connection, it is also possible for unauthorized third parties to receive data.
Important notes Transporting the Tablet PC Protect the Tablet PC from severe shocks and extreme temperatures (e.g. direct sunlight in a car). • • • ► ► ► ► Do not transport your Tablet PC while it is turned on. Carry your Tablet PC with you while traveling. Do not check it in as baggage. Never put your Tablet PC through a metal detector. Have it hand-inspected by security personnel. You can however put your Tablet PC through a properly tuned X-ray machine.
First-time setup of your device First-time setup of your device Gettingstarted First-timesetup Please read the chapter "Important notes", Page 14. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before switching it on for the first time, connect the device to the AC voltage using the AC adapter, see "Connecting the AC adapter", Page 20.
First-time setup of your device Choose a location ACadapter Setup Choosealocation Choose a suitable location for the device before setting it up. In doing so, please follow these instructions: • • • • • • Never place the device or the AC adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can result in damage caused by overheating. The back of the device heats up during normal operation.
First-time setup of your device Connecting the AC adapter ACadapter Makingreadytouse Observe the safety notes in the enclosed "Safety/Regulations" manual. The supplied AC cable conforms to the requirements of the country in which you purchased your device. Make sure that the AC cable is approved for use in the country in which you intend to use it. ► Connect the AC cable (1) to the AC adapter. ► Plug the AC cable (2) into a power outlet.
First-time setup of your device Switching on the device for the first time Switchingon for thefirsttime To make it easier to use your device for the first time, the operating system is pre-installed on the hard disk. 1 2 2 ► Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicators (2) light up whenever the system is switched on.
First-time setup of your device ► During the installation process, follow the on-screen instructions. You can find information and help on the Windows operating system functions online at "http://windows.microsoft.com". If a Windows 8.1 operating system is installed on your Tablet PC, a tutorial is automatically started when a new user logs on for the first time to show you how to use the new functions of Windows 8.1.
Working with the Tablet PC Working with the Tablet PC Tablet Tablet,operation This chapter describes the basics for operating your Tablet PC. You can find instructions on how to connect external devices (e.g. mouse, flash storage) to the Tablet PC in the chapter "Connecting external devices", Page 77. Please refer to the notes in the chapter "Important notes", Page 14.
Working with the Tablet PC No. 1 2 3 24 Status indicator Description Power-on indicator • The indicator lights up white: The Tablet PC is switched on. • The indicator flashes: The Tablet PC is in sleep mode (Save-to-RAM). • The indicator is not lit: The Tablet PC is switched off or in Save-to-Disk mode. Battery charging indicator • The indicator light is orange: The battery is being charged.
Working with the Tablet PC Switching the Tablet PC on Tablet:Switching on Suspend/Resumebutton Power-onPower-onindicator 1 2 2 ► Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicators (2) light up whenever the system is switched on.
Working with the Tablet PC Programing the ON/OFF button You can program the ON/OFF button: Operating system Windows 7 Windows 8.1 Menu Start - (Settings) - Control Panel - System and Security - Power Options Windows 8.1 Desktop - Control Panel - Hardware and Sound - Power Options If you have assigned a password, you must enter this when requested to do so in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page 66.
Working with the Tablet PC Touchscreen Notes Touchscreen High-quality LCD screens (TFT) are installed in Fujitsu Tablet PCs. For technical reasons, these screens are manufactured for a specific resolution. An optimal, clear picture can only be ensured in the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear picture. The screen resolution of your Tablet PC’s touchscreen is optimally set at the factory.
Working with the Tablet PC Select display orientation (portrait or landscape format) Displayorientation Portraitformat Landscapeformat You can choose to use either portrait or landscape format for the display. Windows 7 You can change these settings in the Fujitsu menu or under Start - (Settings -) Control Panel - Hardware and Sound - Display - Settings. Windows 8.1 You can change these settings under Windows 8.1 Desktop - Control Panel Hardware and Sound - Windows Mobility Center / Rotate screen.
Working with the Tablet PC Actions with one finger (Windows 8.1 Modern) Action Wipe your finger over the screen from the right-hand edge. Description ► Open Charms with system commands (equivalent to pressing the Windows key + C key on a keyboard). ► Working with the mouse: Position the mouse pointer at the bottom right-hand edge of the screen. Wipe your finger over the screen from the left-hand edge.
Working with the Tablet PC Action Press and hold Description ► Keep your finger pressed on an object on the screen to display a menu with further options. ► Working with the mouse: Move the mouse pointer over the object to display a menu with further options. Tap on an object ► Tap your finger on an object on the screen to open an App or a link or to execute a command. ► Working with the mouse: Left-click on the object.
Working with the Tablet PC Actions with one finger (Windows 7 / Windows 8.1 Desktop) Action Selecting objects (click with the left mouse button) Starting programs (double-click with the left mouse button) Moving objects/windows (while holding the left mouse button pressed, drag & drop) Opening a context menu (click with the right mouse button) Moving the cursor Fujitsu Description ► Tap once briefly with the finger on the object. ► Use one finger to tap twice in quick succession on the program symbol.
Working with the Tablet PC Actions with two fingers (Windows 7 / Windows 8.1 Desktop) Action Scrolling Description ► Place two fingers on the touchscreen. ► Move the fingers up to scroll up. or ► Move the fingers down to scroll down. Rotating ► Position your thumb on the touchscreen and rotate the image clockwise or counter-clockwise using your index finger.
Working with the Tablet PC Action Increase or decrease view Description ► Put two fingers on the touch screen and move them apart to increase the size of the view. or Lock context-sensitive menus Fujitsu ► Put two fingers on the touch screen and move them together to decrease the size of the view. ► Use two fingers to tap twice in quick succession on the touchscreen.
Working with the Tablet PC Using the stylus Pen 1 = stylus tip 3 2 = stylus button (right mouse button) 3 = eyelet for optional stylus tether 2 1 You can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and to navigate through the programs. Programs that support handwriting recognition also allow you to write directly on the screen with the stylus. You can also use the stylus as a drawing tool.
Working with the Tablet PC Action Mouse Selecting menu Click with the left mouse button. items Starting programs Double-click with the left mouse button. Moving an object Drag with the left mouse button or window pressed. Opening a context Click with the right mouse button. menu Moving the cursor Move the mouse Stylus Tap on the menu entry with the tip of the stylus. Tap on the program symbol twice in rapid succession using the stylus tip. Place the stylus tip directly on the object or window.
Working with the Tablet PC Calibrating the stylus You must calibrate your Tablet PC with the stylus before first use, so that it recognizes the stylus as accurately as possible. You should also always repeat the calibration if the coordination between the stylus and the cursor movement deteriorates. Operating system Windows 7 / Windows 8.1 Desktop Menu To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats.
Working with the Tablet PC Tablet buttons In addition to an on/off switch (4), your Tablet PC is fitted with three tablet buttons. 1 No. 1 2 3 Description Shortcut button Decrease volume button Increase volume button 2 3 4 Functions Start function manager or screen shot function Decrease volume Increase volume If the Windows key of the Tablet PC is pressed in combination with the ON/OFF switch (4), the function corresponds with the key combination Ctrl + Alt + Del on a keyboard.
Working with the Tablet PC Rechargeable battery Rechargeablebattery Servicelife,battery Battery The built-in battery provides the Tablet PC with the necessary power for use on the move. You can increase the service life of the battery by caring for the battery properly. The average battery service life is around 500 charge/discharge cycles. You can extend the battery service life by taking advantage of the available energy-saving functions.
Working with the Tablet PC Using the energy saving functions Battery Energy The Tablet PC uses less power when the energy saving features are enabled. You will then be able to work longer when using the battery before having to recharge it. The energy efficiency is increased and environmental pollution is reduced. By choosing the best power options, you can make significant savings and at the same time help protect the environment.
Working with the Tablet PC Memory cards Slot Your Tablet PC is equipped with an integrated storage card reader. Use storage cards to enlarge the storage of your Tablet PC. Follow the manufacturer’s instructions when handling the memory cards. Memory card Supported formats The following formats are supported: • • • Micro Secure Digital (Micro SDTM Card) Micro SDHC Micro SDXC Inserting the memory card 2 1 ► Open the slot cover (1). ► Carefully slide the storage card into the slot (2).
Working with the Tablet PC Removing the memory card Memorycard To avoid any loss of data, always follow the correct procedure for removing the card (see the documentation for your operating system). ► Open the slot cover. a 1 1 2 3 ► Press the edge of the memory card so that the memory card jumps (1) slightly out of the slot (a). ► Pull the memory card out of the slot (a) in the direction of the arrow (2). ► Close the slot cover (3).
Working with the Tablet PC SIM card A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a cellular phone or Tablet PC and, together with an integrated 4G module, enables access to a cellular radio network. Follow the instructions supplied by the provider of the SIM card. If you do not feel the the SIM card engage as you insert it, use a pointed object to insert the SIM card. Please note that the SIM card format must be micro-SIM (3FF).
Working with the Tablet PC Removing a SIM card ► Open the slot cover. 1 a 2 3 ► Press the edge of the SIM card so that the SIM card jumps slightly out of the slot (1). ► Pull the SIM card out of the slot (a) in the direction of the arrow (2). ► Close the slot cover (3). Wireless LAN/Bluetooth/4G/LTE/NFC wireless components The installation of wireless components not approved by Fujitsu will invalidate the certifications issued for this device.
Working with the Tablet PC Further information on WLAN and Bluetooth For further information about WLAN or Bluetooth, please refer to the appendix of this Operating Manual. For WLAN specifications, see chapter "WLAN specifications", Page 94. Access via UMTS If you ordered an integrated UMTS module with your system, you can enjoy optimum reception and maximum energy efficiency without awkward cables or antennas. The optional UMTS module is ready for use immediately.
Working with the Tablet PC Ethernet and LAN (only with performance docking cradle, keyboard docking station or power keyboard docking station) EthernetLAN The internal network module of your Tablet PC supports Ethernet LAN. You can use it to establish a connection to a local network (LAN = Local Area Network). ► Connect the network cable to the LAN port of the performance docking cradle (1).
Accessories for your Tablet PC (optional) Accessories for your Tablet PC (optional) The following accessories are available for your Tablet PC: • Performance docking cradle for charging the Tablet PC and with additional ports • Keyboard docking station with additional ports (without replaceable battery) • Power keyboard docking station with additional ports (with replaceable battery) • Intermediary VESA Mount Plate • Hand strap • Shoulder strap • Folio case The following sections provide more information o
Accessories for your Tablet PC (optional) Your performance docking cradle (optional) As well as fast charging, your performance docking cradle is a device that also allows you to quickly connect your Tablet PC to your peripherals such as a monitor, keyboard, mouse, etc. You only need to dock the Tablet PC to be able to work with your peripheral devices.
Accessories for your Tablet PC (optional) Connecting the Tablet PC to the performance docking cradle It is possible to connect the Tablet PC to the performance docking cradle while it is running. Disconnect the AC adapter from the Tablet PC before connecting the Tablet PC to the performance docking cradle. When the Tablet PC is connected to the performance docking cradle, you must connect the AC adapter to the performance docking cradle.
Accessories for your Tablet PC (optional) ► Push the Tablet PC onto the performance docking cradle in the direction of the arrow (1) until you feel it engage on the connector and until the slide-out position returns to its original position. ► Plug the AC adapter cable into the DC jack (DC IN) on the performance docking cradle (2). ► Connect the AC cable to the AC adapter (3). ► Plug the AC cable into the power outlet (4).
Accessories for your Tablet PC (optional) Keyboard docking station or power keyboard docking station (optional) The keyboard docking station is available in two options: • • normal keyboard docking station without replaceable battery power keyboard docking station with replaceable battery The (power) keyboard docking station is a device which has been optimized for convenient input of texts and allows external devices to be connected. It only needs to be docked with the Tablet PC.
Accessories for your Tablet PC (optional) Ports on the keyboard docking station or power keyboard docking station Ports Keyboarddockingstation 1 2 34 65 7 13 12 11 10 9 8 1 = Release button 2 = Num Lock indicator (switch virtual keypad on and off) 3 = Caps Lock indicator (switch upper case writing function on and off) 4 = Scroll indicator (Scroll Lock, function depends on application program) 5 = Battery indicator of the battery in the power keyboard docking station (optional) 6 = Battery charging
Accessories for your Tablet PC (optional) Status indicators for the power keyboard docking station with additional replaceable battery This section does not apply to the normal keyboard docking station without replaceable battery! Status indicator Battery indicator Description The battery indicator shows the state of charge of the battery. • Battery charging indicator The indicator lights up white: The battery is between 50% and 100% charged.
Accessories for your Tablet PC (optional) Connecting the Tablet PC to the keyboard docking station or power keyboard docking station If the Tablet PC is connected to the keyboard docking station or power keyboard docking station, you can connect the AC adapter either to the keyboard docking station or to the Tablet PC. Keyboarddockingstation ► Position the keyboard docking station as shown.
Accessories for your Tablet PC (optional) Separating the Tablet PC from the keyboard docking station or power keyboard docking station It is possible to separate the Tablet PC from the keyboard docking station or power keyboard docking station while it is running. However, to prevent any problems, we recommend that you execute the appropriate undocking function provided by the operating system.
Accessories for your Tablet PC (optional) Removable rechargeable battery for the power keyboard docking station (optional) Rechargeablebattery Servicelife,battery Battery This section does not apply to the normal keyboard docking station without replaceable battery! Removing and installing the battery Only use rechargeable batteries approved by Fujitsu for your Tablet PC. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections.
Accessories for your Tablet PC (optional) 1 1 2 ► Disconnect the catches of the battery compartment cover and open the battery compartment cover (1). ► Lift the battery at the deep point in the middle of the battery compartment and take the battery out of the battery compartment (2).
Accessories for your Tablet PC (optional) Installing a rechargeable battery 1 3 3 2 2 ► Position the rechargeable battery on the edge of the battery compartment and insert the rechargeable battery into the battery compartment (1). ► Insert the catches of the battery compartment cover in the openings on the device (2). ► Close the battery compartment cover (3).
Accessories for your Tablet PC (optional) Intermediary VESA Mount Plate (optional) On models with screw holes, Smart Card reader option or palm vein sensor option, an optional Intermediary VESA Mount Plate can be attached. Use the Intermediary VESA Mount Plate to secure the Tablet PC to a monitor with the corresponding screw holes, for example. The Intermediary VESA Mount Plate cannot be used in conjunction with the hand strap or shoulder strap.
Accessories for your Tablet PC (optional) • • Use the appropriate tool of the correct size when securing the screws. Keep the screws out of the reach of children. 1 1 1 1 2 2 2 2 4 4 3 4 4 ► Remove the covers from the screw holes on the rear of the tablet PC (1). ► Position the spacers between the tablet PC and the Intermediary VESA Mount Plate (2).
Accessories for your Tablet PC (optional) ► Position the Intermediary VESA Mount Plate on the tablet PC (3). Make sure that the screw holes of the Intermediary VESA Mount Plate and of the tablet PC line up exactly above one another. ► Secure the Intermediary VESA Mount Plate with the screws (4). Hand strap (optional) On models with screw holes, Smart Card reader option or palm vein sensor option, an optional hand strap can be attached.
Accessories for your Tablet PC (optional) • • • Use the appropriate tool of the correct size when securing the screws. Keep the screws out of the reach of children. Do not shake the device too much when you are holding it on the hand strap, otherwise it may fall down. 1 1 2 2 4 4 3 ► Remove the covers from the screw holes on the rear of the tablet PC (1). ► Position the spacers between the tablet PC and the hand strap (2). ► Put the hand strap in position on the tablet PC (3).
Accessories for your Tablet PC (optional) Only use the M2x8 screws to secure the hand strap. ► Secure the hand strap with the screws (4). Shoulder strap (optional) On models with screw holes, Smart Card reader option or palm vein sensor option, an optional shoulder strap can be attached. The shoulder strap cannot be used in conjunction with the Intermediary VESA Mount Plate or hand strap.
Accessories for your Tablet PC (optional) • • • Use the appropriate tool of the correct size when securing the screws. Keep the screws and mountings out of the reach of children. To prevent damaging the screws, do not use a motorized screwdriver. 1 1 2 2 3 3 ► Remove the covers from the screw holes on the rear of the tablet PC (1).
Accessories for your Tablet PC (optional) Only use the M2x8 screws to secure the mountings. ► Position spacers under the mountings, position the mountings on the rear of the tablet PC and secure the mountings with the screws (2). ► Secure the shoulder strap on the mountings (3). Folio case (optional) If you are using the folio case, we do not recommend that you connect the Tablet PC to the keyboard docking station or power keyboard docking station.
Accessories for your Tablet PC (optional) Fujitsu 65
Security functions Security functions Securityfunctions Your Tablet PC has several security features that you can use to secure your system and your personal data from unauthorized access. This chapter explains how to use these functions, and what the benefits are. Please remember that in some cases, for example, forgetting your password, you may be locked out of the system and unable to access your data.
Security functions Configuring the fingerprint sensor Fingerprintsensor The fingerprint sensor can record the image of a fingerprint. With additional fingerprint software, this image can be processed and used instead of a password. 1 1 ► Install the fingerprint software to be able to use the fingerprint sensor (1).
Security functions Using the palm vein sensor (device-dependent) Palm veinsensor Whether your device has a palm vein sensor or not depends on the device configuration which you ordered. The palm vein sensor (1) can record the image of the veins on the palm of your hand. This image is evaluated with additional software and can be used in place of a password.
Security functions 2 2 ► Fasten the rubber feet with the screws (2). ► Install the software to use the palm vein sensor. You can obtain further information on the palm vein sensor in the "Appendix: Miscellaneous Information".
Security functions Using the Security Lock Anti-theftprotection SecurityLock Your device comes with a Security Lock device for the Kensington Lock Cable. With the Kensington Lock Cable, a sturdy steel cable, you can protect your device and the port replicator against theft. The Kensington Lock Cable is available as an accessory. ► Fit the Kensington Lock Cable to the corresponding mechanism on your device.
Security functions Protecting BIOS Setup Utility (supervisor password and user password) If you have opened these operating instructions on the screen, we recommend that you print them out. You cannot call up the instructions on the screen while you are setting up the password. BIOS SetupUtility The supervisor password and the user password both prevent unauthorized use of the BIOS Setup Utility.
Security functions Removing passwords To remove a password (without setting a new password) perform the following steps: User password Supervisorpassword Password ► Start the BIOS Setup Utility and go to the Security menu. ► Highlight the Set Supervisor Password or Set User Password field and press the Enter key. You will be requested to enter the current password by the Enter Current Password prompt. Enter New Password will appear and you will be requested to enter a new password.
Security functions Password protection for the hard disk Passwordprotection The hard disk password prevents unauthorized access to the hard disk drives and is checked internally each time the system is booted. The condition for this is that you have assigned at least the supervisor password. Activating hard disk protection ► Call up the BIOS Setup and select the Security menu.
Security functions SmartCard reader (optional) Securityfunctions Depending on the selected model, your device is equipped with a Smartcard reader (only on models with screw hole and SmartCard reader option). SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
Security functions Inserting the SmartCard Depending on the selected model, your device is equipped with a Smartcard reader (only on models with screw hole and SmartCard reader option). Do not use force when inserting and removing the SmartCard. Make sure that foreign objects do not fall into the SmartCard reader. 1 ► Push the SmartCard into the SmartCard reader with the chip facing the rear of the Tablet PC.
Security functions Trusted Platform Module - TPM (device dependent) Trusted Platform Module TPM To use the TPM, you must enable the TPM in the BIOS Setup before the software is installed. The requirement for this is that you have assigned at least the supervisor HDD password (see "Security functions", Page 66). Enabling TPM • ► ► ► Requirement: You have assigned a supervisor password (see "Security functions", Page 66). Call BIOS Setup and select the Security menu.
Connecting external devices Connecting external devices Under all circumstances, please observe the safety notes provided in the "Important notes", Page 14 chapter before connecting or disconnecting any devices to or from your Tablet PC. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug.
Connecting external devices HDMI port (only performance docking cradle, keyboard docking station or power keyboard docking station) HDMIport The HDMI port can be used to connect an external amplifier, LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port. Some LCD televisions have only two speakers/speaker ports and therefore cannot reproduce Dolby Digital or DTS.
Connecting external devices Connecting USB devices USBports On the USB ports you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect the cables of USB devices while the operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbps. USB 2.0 has a data transfer rate of up to 480 Mbps. USB 3.0 has a data transfer rate of up to 5 Gbps.
Connecting external devices Connecting external audio devices Your tablet PC has a combined headphone and microphone port, your (optional) performance docking cradle has separate ports for headphones and a microphone.
Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility System Configuringhardware Configuringsystem Setup Configuration,BIOSSetupUtility settings,BIOSSetupUtility To navigate more easily in the BIOS Setup Utility, you can use an external USB keyboard. The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the Tablet PC. When the Tablet PC is delivered, the default settings are effective.
Settings in BIOS Setup Utility BIOS Setup Utility operation BIOS SetupUtility Press the F1 key to display help about operation of the BIOS Setup Utility. The description of the individual settings is shown in the right-hand window of the BIOS Setup Utility. With the F9 key you can load the default settings of the BIOS Setup Utility. ► Use the cursor keys ← or → to select the menu you wish to access to make changes. The menu is displayed on the screen.
Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtility You need to select the desired option in the Exit menu and activate it by pressing the Enter key: Exit Saving Changes - save changes and exit BIOS Setup Utility ► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The Tablet PC is rebooted and the new settings come into effect.
Troubleshooting and tips Troubleshooting and tips Problem solving Fault Tips Troubleshooting If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. ► Switch the Tablet PC off. ► Please contact the Hotline/Service Desk.
Troubleshooting and tips Executing a reset If the device no longer responds to your inputs, choose one of the following options: Forced shutdown ► Press and hold the ON/OFF button for at least 4 seconds. The device will be shut down. You can then restart it. Resetting the rechargeable battery ► Shut down the device. If the device does not respond, you may have to force the shutdown, as described in the previous section. ► Disconnect the AC adapter from the device.
Troubleshooting and tips Battery indicator does not illuminate Cause The battery is discharged. Troubleshooting ► Charge the battery. or ► Connect the Tablet PC to a power outlet using the AC adapter. The Tablet PC’s touchscreen remains dark darktouchscreen Touchscreen Cause Touchscreen is switched off. External monitor or television set connected. Troubleshooting ► Press a key (external keyboard) or tap on the touchscreen.
Troubleshooting and tips The external monitor remains blank Monitor Cause Monitor is switched off. Power saving has been activated (monitor is blank). Brightness is set to dark. Troubleshooting ► Switch the external monitor on. ► Press a key (external keyboard) or tap on the touchscreen. ► Adjust the brightness of the monitor. Screen output is set to the Tablet PC ► Check whether the graphics driver settings touchscreen.
Troubleshooting and tips Stylus input not working Cause Incorrect driver installed. Troubleshooting ► If your device is one which can only be operated using the stylus, install the driver for the standard model. or ► If your device is one which can be operated using the stylus and by finger, install the driver for the "Dual Digitizer" model. The Tablet PC does not start after switch on TabletPC Cause The battery is dead. Troubleshooting ► Charge the battery.
Troubleshooting and tips The printer does not print Printer doesnotprint Cause The printer is not switched on. The printer is not connected correctly. The printer driver is faulty or not correctly installed, or it is the wrong printer driver. Troubleshooting ► Make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer). ► Check that the data cable between the Tablet PC and the printer is properly connected.
Troubleshooting and tips Smart Card reader is not recognized Cause Smart Card inserted incorrectly. Troubleshooting ► Make sure you have inserted your Smart Card into the Smart Card reader with the chip facing upwards / downwards (device-dependent). ► Check whether the Smart Card you are using is supported. Your Smart Card must comply with the ISO standard 7816-1, -2, -3 and -4.
Troubleshooting and tips SmartCard lost Cause SmartCard lost. Troubleshooting ► If you work in a network, contact your system administrator, who can boot your Tablet PC with a supervisor SmartCard. Acoustic warning Acoustic warnings Errors Cause A beep sounds every few seconds. Troubleshooting ► Charge the battery. The battery is almost dead. Error messages on the screen Error messages onthescreen Errors This section describes the error messages generated by the BIOS Setup.
Troubleshooting and tips Error message/cause CMOS battery bad Troubleshooting ► Contact your sales outlet or our customer service center. If the error message occurs repeatedly, the buffer battery in the Tablet PC is flat. System CMOS checksum bad - Default configuration ► Switch the Tablet PC off. used ► Switch the Tablet PC on. The system configuration information is ► In the BIOS Setup, select the Exit menu. incorrect. ► Select the entry Load Setup Defaults. ► Select OK and press the Enter key.
Technical data Technical data Tablet PC General Processor Main memory (SO DIMM) Electrical data 5th Generation Intel® Core™ with vPro™ technology (vPro optional, dependent on configuration) 4 GByte / 8 GByte DIMM onboard Safety regulations complied with Protection class Maximum power consumption (when the Tablet PC is switched on, connected to the keyboard docking station and the battery is being charged): Touchscreen Size CE II 65 W Screen resolution Pixel class Brightness control Technology 1920 x
Technical data Weight depending on configuration Input devices Tablet buttons Stylus Slots Memory card slot SIM card slot Smart Card slot (optional shell) Ports Combined headphones and microphone port Docking port Micro HDMI port USB (Universal Serial Bus) Security Lock device Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Transport temperature (2K2) • • Standard Shell tablet only: 2.15 lbs / 0.
Technical data Typical operating distances** Number of channels Security • 802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft. (91 m) @ 6 Mbps • 802.11ac: 40 ft. (12 m) @ 54 Mbps; 300 ft. (91 m) @ 6 Mbps • 802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft. (91 m) @ 1 Mbps • 802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft. (91 m) @ 1 Mbps • 802.11n: Estimated double the operating distance of 802.11g and 802.11a in their respective frequencies • 802.11a: 8 independent channels • 802.
Technical data Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://solutions.us.fujitsu.com/www/content/support/contact/index.php". Rated voltage Rated capacity 3-cell lithium polymer battery 4250 mAh 10.8 V 46 Wh AC adapter 65 W for the Tablet PC Technicaldata Rated voltage Max. rated current 19 V 3.42 A An additional AC adapter or AC cable can be ordered at any time.
Technical data AC adapter 65 W for the performance docking cradle (optional) Technicaldata Rated voltage Max. rated current 19 V 3.42 A An additional AC adapter or AC cable can be ordered at any time.
Technical data Intermediary VESA Mount Plate Dimensions Width x Depth x Height 222 mm x 91 mm x 12.2 mm / Weight 8.74 in x 3.58 in x 0.48 in 130 g / 0.29 lbs Hand strap (optional) Dimensions Width x Depth x Height 478 mm x 77 mm x 13 mm / Weight 18.8 in x 3.03 in x 0.51 in approx. 24 g / 0.053 lbs. Shoulder strap (optional) Dimensions Width x Depth x Height 1265 mm x 25 mm x 4.8 mm / Weight 49.80 in x 0.98 in x 0.189 in approx. 33.4 g / 0.074 lbs.
Manufacturer’s notes Manufacturer’s notes Disposal and recycling Notes You can find information on this subject on your Tablet PC or on our website ("http://solutions.us.fujitsu.com/www/content/products/trade-in_program/"). Recycling your battery Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you may want to replace the battery with a fresh one*.
Manufacturer’s notes UL Notice IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output rating of 19 VDC, with a minimum current of 3.42A (65W). The correct output rating is indicated on the AC adapter label.
Manufacturer’s notes ENERGY STAR Compliance Your Fujitsu system is an ENERGY STAR qualified mobile PC. By choosing a computer with the latest energy-saving technology, you’re helping to preserve our environment for future generations. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency, U.S. Department of Energy, Natural Resources Canada, and other governments around the world helping us save money while protecting the environment through energy efficient products and practices.
Declarations of conformity Declarations of conformity Declarationsofconformity This device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC and IC Regulatory Information FCC and IC Regulatory Information Please note the following regulatory information related to the wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
FCC and IC Regulatory Information Déclaration d’Industrie Canada Cet appareil est conforme à la Section 15 des Règles de la FC C et à la ( aux) norme(s) RSS concernant les appareils exempt s de licence par Industrie Canada. Son fonctionnement est soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer d’interférence nuisib le; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles pouvan t causer un mauvais fonctionnement de l’appareil.
FCC and IC Regulatory Information Déclaration de la FCC/d’Industrie Canada sur l’exposition aux radiofréquences La norme régissant l’exposition des appareils sans fil aux radiofréquences emploie une unité de mesure dénommée Taux d’absorption spécifique, ou TAS. La FCC et Industrie Canada ont défini la même limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limites d’exposition générales de la population/non contrôlées définies par les règles C95.
FCC and IC Regulatory Information Avis pour le Canada Le matériel destiné à un usage sur la bande 5 150 - 5 250 MHz doit être utilisé uniquement à l’intérieur afin de réduire les risques de brouillage nuisible causé aux systèmes mobiles par satellite fonctionnant sur un même canal. Un gain d’antenne de 6 dBi est autorisé (pour le matériel utilisant les bandes 5 250 - 5 350 MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformément à la limite p.i.r.e. maximale permise selon l’annexe A9.
Appendix Appendix Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and configure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure its correct operation. Keep this manual in a safe place for future reference.
Appendix Access Point (Infrastructure) Mode Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases).
Appendix ** * * = An optional hub for a wired LAN may be required depending upon the type of access point used. ** = ADSL modem, cable modem, or similar How to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The Operating System that your mobile computer comes with has been pre-configured to support the WLAN device.
Appendix Deactivating/Disconnecting the WLAN Device Disconnecting the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The WLAN device can be disconnected in Windows using the WLAN icon in the system tray (Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though it’s not connected.
Appendix Troubleshooting the WLAN Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Problem Possible Cause Unavailable network connection Incorrect network name (SSID) or network key Possible Solution Ad hoc connection: verify that the network names (SSID’s) and network keys (WEP) of all computers to be connected have been configured correctly. SSID’s and WEP key values must be identical on each machine.
Appendix Problem Possible Cause Unavailable network connection The WLAN device was (continued) deactivated or is disabled Possible Solution Check if the wireless switch is turned On. Go to Start > Control Panel, and doubleclick on Windows Mobility Center. If the wireless network is off, click the Turn wireless on button. The computer to be connected Check if the computer to be is turned off connected is turned ON. Incorrectly configured network Recheck the configuration of settings your network settings.
Appendix Creating a Backup of Bootable Disk and Recovery Image When you purchased your new system, a copy of the recovery image was loaded into a hidden partition on your hard disk drive. Having a copy of the recovery image available to you means that in the event of system failure, you will be able to restore it and re-install the essential access software using Fujitsu Software Auto Installer. To make a copy of the recovery image to DVD disks, you will need three or four blank disks to create the copy.
Appendix Creating a Backup of Essential Access Software When you purchased your new system, a “Fujitsu Software Extractor” shortcut was loaded to “C:\Fujitsu\Drivers\AutoInstaller\”. This shortcut allows you to save the software driver packages along with the extracted Auto Installer software package to a selected location. It is recommended that you save these packages to writable media or an external drive.
Appendix Determining whether Recovery and Utility is pre-loaded 1. Turn on or reboot your system. When the Fujitsu logo appears, press the F12 key. 2. Use the Tab key to get to the Application Menu. 3. Check whether the Recovery and Utility option is present. If it is not present, it means that the utility must be used from the Bootable Disk. Proceed to “Running Recovery and Utility from the Bootable Disk” if Recovery and Utility is unavailable. Running Recovery and Utility from hard disk 1. 2. 3. 4. 5.
Appendix Recovery and Utility tools Note: Recovery and Utility tools may not be available on your system depending on the region from which the system was shipped. Diagnostics tool: The Diagnostics tool is designed for use by IT professionals. It is not likely you will need to use this tool. If you should need to use this tool, perform the following steps: 1. Press the Diagnostics Tool button to start the Diagnostics tool. 2. Read the note, and then click OK. 3.
Appendix RECOVER YOUR SYSTEM WHEN THE HARD DRIVE IS NOT BOOTABLE Restore the Recovery Image for Full Hard Drive Follow the steps in the “Recovering your Recovery Image using Recovery and Utility (for new hard drive or non-bootable hard drive)” section. You will need the Bootable Disk and the Recovery Disk Set for this task. Utility tool: If applicable for your region, the Utility tool contains two options: Hard Disk Data Delete and Partition Creation.
Appendix Recovering Your Recovery Image Using Recovery and Utility (for new hard drive or non-bootable hard drive) If you have installed a new hard drive or your hard drive is not bootable, perform the following steps. Note: You will need the Bootable disk and Recovery Image disk set for this recovery. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 118 Power on your system. When the Fujitsu logo appears on the screen, press the Enter key.
Appendix Installing the Software after the Recovery Image is Restored Auto-installation support for essential access software from hidden partition The below listed steps are applicable only in cases in which the recovery image restore and hidden partition contents have not been wiped out. 1. After the recovery image is restored, launch the desktop icon “Fujitsu Software Auto Installer”. 2. Double-click on “Fujitsu Software Auto Installer” desktop icon. 3. Click Yes on User Account Control Dialog box.
Appendix Auto-installation support for essential access software from backup location The below listed steps are applicable in cases in which a backup copy was created as mentioned in the section “Creating a Backup of essential access software”. 1. It is important to have the extracted Auto installer software package folder and Readme file in the same location as other software folders. Otherwise auto-installation of the software will not be supported. 2.
Appendix Downloading Driver Updates To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download a list of the most current drivers, utilities, and applications to determine whether you have the latest versions. To download the FSDM Utility, go to the Support Site: "http://support.fujitsupc.
Index Index A AC adapter connecting 20 Set up 19 Acoustic warnings 91 Anti-theft protection 70 Audio connections 80 E Ending energy saving mode 88 Energy Energy consumption 39 Energy saving 15 Energy saving functions 39 Error messages on the screen 91 Errors Acoustic warnings 91 Screen messages 91 Ethernet LAN 45 B Battery 38, 55 battery charge 39 Caring for and maintaining 38 charge level 38 Charging 38 Discharges too quickly 89 see Rechargeable battery 38, 55 Service life 38, 55 battery charge meter 38
Index M Making ready to use 20 Memory card handling 40 inserting 40 removing 41 Mobile operation 16 Monitor connection 78 no image 87 remains blank 87 unstable image 87 Monitor connection see VGA port 78 N Notes 14 disposal / recycling Energy saving 15 touchscreen 27 Transport 16 99 O Operating system activating system protection 72 cancel system protection 72 Protecting with password 72 P Packaging 18 Palm vein sensor 68 setting up 68 Password changing 71 entering 71 removing 72 Password protection 70 h
Index Touchpad cleaning 17 Touchscreen cleaning 17 difficult to read 86 notes 27 reflected glare 86 remains dark 86 TPM 76 Transport Damage during transportation Transportation 16 Travel 16 Troubleshooting 84 Trusted Platform Module 76 U USB ports 124 User password change 71 entering 71 removing 72 V VGA port 18 78 W Webcam 37 Winter time 85 Wireless components Safety notes 15 Wireless LAN Safety notes 15 Wrong date/time 85 79 Fujitsu
