User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q738
- Contents
- Declarations of conformity
- Fujitsu Contact Information
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching the Tablet PC on
- Switching the Tablet PC off
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape format)
- Using fingers
- Using the stylus
- Tablet buttons
- Camera
- Rechargeable battery
- Using the power-saving functions
- Memory cards
- SIM card (configuration-dependent)
- Wireless LAN/Bluetooth/4G/LTE wireless components
- Ethernet and LAN (optional, only with cradle, keyboard cover or adapter cable)
- Accessories for your Tablet PC (optional)
- Your docking cradle (optional)
- Keyboard cover (optional)
- Folio cover (optional)
- Protective TPU cover
- Components of the protective TPU cover
- Safety precautions
- Attaching a Smart Card guide
- Inserting the Tablet PC in the protective TPU cover
- Removing the Tablet PC from the protective TPU cover
- Using the stand
- Removing the stand
- Connecting the Tablet PC/protective TPU cover to the keyboard cover
- Connecting the Tablet PC/protective TPU cover to the cradle
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- If you need to restore your system
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the stylus movements
- Stylus input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Smart Card reader is not recognized
- Smart Card PIN forgotten
- User and/or supervisor Smart Card lost
- Smart Card lost
- Acoustic warning
- Error messages on the screen
- Technical data
- Tablet PC
- WLAN specifications
- WWAN specifications
- Screen resolutions for integrated screen and external screens
- Rechargeable battery
- AC adapter 65 W for the Tablet PC with/without keyboard cover
- AC adapter 90 W for Tablet PC with cradle
- Cradle (optional)
- Keyboard cover (optional)
- Folio cover (optional)
- Protective TPU cover with stand, hand strap and shoulder strap (optional)
- Manufacturer’s notes
- FCC and IC Regulatory Information
- Regulatory Notes and Statements
- Wireless LAN, Health and Authorization for use
- Regulatory Information/Disclaimers
- Federal Communications Commission statement and Industry Canada statement:
- Déclaration d’Industrie Canada
- FCC Interference Statement
- FCC Radio Frequency Exposure statement
- Déclaration de la FCC/d’Industrie Canada sur l’exposition aux radiofréquences
- Export restrictions
- Restrictions concernant l’exportation
- Regulatory Notes and Statements
- Canadian Notice / Avis pour le Canada
- Appendix
- Index
Tro ubl eshooting and tips
The external monitor remains bl
ank
Monitor
Cause Troubleshooting
Monitor is sw itched off. ► Sw itch the e xternal monitor on.
Power saving has been activated (monitor is
blank).
► Press a key (external keyboard) or tap on
the touchscreen.
Brightness is set t o dark.
► Ad just the brightness of the
monitor.
Screen output is set to the Tablet PC
touchscreen.
► C heck whether the graphics driver se ttings
are correct or whether an external monitor
has been detected in "Intel Graphics Media
Accelerator Driver for mobile".
The external monitor’s AC cable or data cable is
not connected properly.
► Sw itch off the Tablet PC and the external
monitor.
► C heck whether the AC cable is plugged
properly into the externa l monitor a nd into
the power outlet.
► C heck that the data cable is properly
connected to the Tablet PC and the external
monitor ( if it is plugged in with a conn ector).
► Sw itch on the external monitor and the
Tablet P C.
The external mo
nitor is b lank or the image is unstable
MonitorMonitor
Cause Troubleshooti
ng
The wrong exte
rnal monitor has been selected
or the wrong sc
reen resolution ha s been set for
the applicat
ion program.
► Sh ut down the application program in
Windows. If the error persists after shutting
down the pro gram, use the key combination
for switching the screen output in order to
switch to the touchscreen of th e Tablet PC.
Change the following setting:
► Se t the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
► Se lect monitor: Select monitor 1 or 2 as
described in the documentation for your
operating system.
The cursor does not correctly follow the
stylus movements
Cause
Troubleshooting
Stylus incorrectly calibrated. ► C alibrate the stylus as described in chapters
"
Adjusting the stylus", Page 29 and
"
Calibrat ing the stylus", Page 29.
Fujitsu 77