User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q738
- Contents
- Declarations of conformity
- Fujitsu Contact Information
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching the Tablet PC on
- Switching the Tablet PC off
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape format)
- Using fingers
- Using the stylus
- Tablet buttons
- Camera
- Rechargeable battery
- Using the power-saving functions
- Memory cards
- SIM card (configuration-dependent)
- Wireless LAN/Bluetooth/4G/LTE wireless components
- Ethernet and LAN (optional, only with cradle, keyboard cover or adapter cable)
- Accessories for your Tablet PC (optional)
- Your docking cradle (optional)
- Keyboard cover (optional)
- Folio cover (optional)
- Protective TPU cover
- Components of the protective TPU cover
- Safety precautions
- Attaching a Smart Card guide
- Inserting the Tablet PC in the protective TPU cover
- Removing the Tablet PC from the protective TPU cover
- Using the stand
- Removing the stand
- Connecting the Tablet PC/protective TPU cover to the keyboard cover
- Connecting the Tablet PC/protective TPU cover to the cradle
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- If you need to restore your system
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the stylus movements
- Stylus input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Smart Card reader is not recognized
- Smart Card PIN forgotten
- User and/or supervisor Smart Card lost
- Smart Card lost
- Acoustic warning
- Error messages on the screen
- Technical data
- Tablet PC
- WLAN specifications
- WWAN specifications
- Screen resolutions for integrated screen and external screens
- Rechargeable battery
- AC adapter 65 W for the Tablet PC with/without keyboard cover
- AC adapter 90 W for Tablet PC with cradle
- Cradle (optional)
- Keyboard cover (optional)
- Folio cover (optional)
- Protective TPU cover with stand, hand strap and shoulder strap (optional)
- Manufacturer’s notes
- FCC and IC Regulatory Information
- Regulatory Notes and Statements
- Wireless LAN, Health and Authorization for use
- Regulatory Information/Disclaimers
- Federal Communications Commission statement and Industry Canada statement:
- Déclaration d’Industrie Canada
- FCC Interference Statement
- FCC Radio Frequency Exposure statement
- Déclaration de la FCC/d’Industrie Canada sur l’exposition aux radiofréquences
- Export restrictions
- Restrictions concernant l’exportation
- Regulatory Notes and Statements
- Canadian Notice / Avis pour le Canada
- Appendix
- Index
Security functions
Activating hard disk protection
► Call up the BIOS Setup and select the Security menu.
If you have not assigned BIOS passwords yet, define the supervisor and the user
password now, if desired (see "
Securit y functions", Page 60).
► Mark the Hard Disk Security field and press the Enter key.
► In the a rea Drive0 , mark the field Set Master Password and press the Enter key.
Enter new Password then ap pears and you are asked to enter a password.
► Ente r the password and press the Enter key.
Confirm ne w Password requires you to confirm the passw ord.
► Ente r the password again and press the En ter key.
With Setup Notice: Changes have b een saved you receive confirmation tha t
the new password has been saved.
The field Password Entry on B oot is set to Enabled by default. You can exit the BIOS
Setup once you have finished changing the settings.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
The Tablet PC reboots and your hard disk is now protected with a password. The
password prompt is enabled as soon as the Tablet PC has rebooted.
Deactivating hard disk protection
To cance l a password (without setting a new password) proceed as follows:
► Call up the BIOS Setup and select the Security menu.
► Mark the Hard Disk Security field and press the Enter key.
► In the a rea Drive0 , mark the field Set Master Password and press the Enter key.
With the prompt Enter current Password yo u are first asked to ente r the old passw ord again.
With Enter new Password you are then prompted to enter a new password.
► Afte r the requ est, press the Enter key three times.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
The Tablet PC reboots and there is no longer any password protection for this hard disk.
64 Fujitsu