User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q736
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the pen
- Tablet buttons
- Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN€/ Bluetooth€/ UMTS€/ LTE / NFC wireless components (dependent on configuration)
- Ethernet and LAN (only cradle or keyboard dock)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- User and/or supervisor SmartCard lost
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Manufacturer’s notes
- Index
Working with the Tablet PC
elements) on the screen. The maximum permitted numb er of such faulty pixels is
specified in the international standard ISO 9241-307 (Class II).
Example:
A monitor with an HD resolution of 1280 x 1024 has 1, 310,720 pixels. Each pixel consists of three
subpixels (red, green and blue), s o there are almost 3.9 million subpixels in tota l. According to ISO
9241-307 (class II), a maximum of 3 light and 3 dark p ixels and in addition 7 light or 13 dark subpixels
or an equivalent mix (1 light subpixel counts as 2 d ark subpixels) are allowed to be defective.
Pixel
A pixel consists of 3 subpix
els, no rmally red, green and
blue. A pixel is the smalle
st element that can be generated
by complete functionalit
yofthedisplay.
Subpixel
A subpixel is a separatel
y ad dressable internal structure
within a pixel that enha
nces the pixel function.
Cluster A cluster contains two or more defective p ixels or
subpixels in a 5 x 5 pixel block.
Background light in
g
LCD screens are ope
rated with background lighting. The luminosity of the background
lighting can decre
ase over the period of use of the Tablet PC. However, you can
set the brightness
of your screen individually.
Ambient light sen
sor
If you r Tablet PC
was shipped with the Windows operating system, the screen brightness
is regulated by
the ambient light sensor according to the particular light conditions. This
results in opti
mum readability and longer battery life at the same time.
If your Tablet
PC was shipped with Windows 10, the adaptive brightness setting is enabled. To
change the amb
ient light sensor settings, select Control Panel - System and Security - P ower Options -
Change plan se
ttings - Change advanced power options - Display - A ctiva te adaptive brightness setting.
Synchronisi
ng th e display on the touchscreen and an external monitor
In Windows 1
0 you can proceed as follows to set the output type :
► W ipe your finger over the screen starting from the right-hand edge.
► Select All settings.
► Lo ok for the keyword "project".
► Select the required function.
24 Fujitsu