User manual

First-time setup of your d evice
Selecting a location
SelectingalocationDeviceMains adapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapt er on a heat-se nsitive surface.
The surface could be damaged as a resu lt.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can result in damage caused by overheating.
• The underside of the device heats up during normal operation. Prolonged contact
with the skin may b ecome unp leasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.97" away from the device and
its mains adapter to ensure adequ ate v entilation.
• Do not expose the device to extreme environmental conditions. Protect
the device against dust, moisture and heat.
Mains adapter connecting
Preparingforo perationMainsadapter
Observe the safet
y notes in the enclosed "Safety/R egulations" manual.
The supplied pow
er cable conforms to the requirements of the co untry in
which you purcha
sed your device. Make sure that the power cable is ap proved
for use in the c o
untry in which you intend to use it.
3
1
2
► Con nect the power cable (1) to the
mains adapter.
► Plug the mains cable (2) into a mains outlet.
► Con nect the mains adapter cable (3) t o
the DC jack (DC IN) of the device.
Fujitsu 17