Operating manual FUJITSU Tablet STYLISTIC Q736 System
Congratulations on your purchase of an innovative product from Fujitsu. The latest information about our products, tips, updates etc. can be found on the Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.
Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2016. All rights reserved. Publication Date 03/2016 Order No.
FUJITSU Tablet STYLISTIC Q736 Operating manual Innovative technology 7 Ports and controls 9 Important notes 12 First-time setup of your device 16 Working with the Tablet PC 20 Accessories for your Tablet PC (optional) 36 Security functions 57 Connecting external devices 67 Settings in BIOS Setup Utility 72 Troubleshooting and tips 75 Technical data 85 Manufacturer’s notes 91 Index 99
Remarks Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions. Trademarks Fujitsu, the Fujitsu logo and STYLISTIC are registered trademarks of Fujitsu Limited or its subsidiaries in the USA and other countries.
Contents Contents Innovative technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Switching the wireless components on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting up WLAN access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NFC (Near Field Communication, dependent on configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . Access via UMTS / LTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . Exit Discarding Changes – Discard changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . Load Setup Defaults – Copy Standard Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Discard Changes – Discard changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . .
Contents Regulatory information for Tablet PCs without wireless device . . . . . . . . . . . . . . . . . . . . . . . . . . . DOC (Industry CANADA) notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FCC Regulatory information for Tablet PCs with radio device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 95 97 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Innovative technology Innovative technology ... and ergonomic design make your device a reliable and convenient companion. The device boots very quickly, is ready for immediate use and offers a particularly long operating time because of its high capacity battery. The user-friendly "BIOS Setup Utility" offers powerful password protection functions which can be used to control your Tablet PC’s hardware and protect your system better against unauthorised use.
Innovative technology Notational conventions Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information for the proper use of the device.
Ports and controls Ports and controls This chapter presents the individual hardware components of your device. It gives you an overview of the device’s indicators and connections. Please familiarise yourself with these components before you start to work with the device.
Ports and controls Left side 1 1 2 3 4 5 = = = = = 2 3 4 5 6 6 7 8 9 Security Lock device DC input connector (DC IN) Eyelet for optional pen tether Power-on indicator Battery charging indicator = = = = 7 8 9 Wireless components indicator Micro HDMI port Memory card slot (protected by cover) SIM card slot (protected by cover) Right side 1 1 2 3 4 5 10 = = = = = Shortcut button Volume down button Volume up button ON/OFF button USB port (USB 2.0) 2 3 4 5 6 7 8 9 6 = USB port (USB 3.
Ports and controls Rear (2 variants: without screw holes or with screw holes and SmartCard reader) 1 7 43 2 5 7 5 5 1 = Fingerprint sensor (dependent on configuration) 2 = Camera light 3 = Camera 4 = Camera LED 5 = Screw holes (dependent on configuration) for securing accessories Fujitsu 5 2 43 5 6 1 6 = SmartCard reader (dependent on configuration) 7 = NFC (Near Field Communication) (dependent on configuration) 11
Important notes Important notes Notes Importantnotes This chapter contains essential safety information which must be followed when working with your Tablet PC. The other notes provide useful information on your Tablet PC. Safety notes Notes Safetynotes Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below. Please pay special attention to the sections in the manual marked with the symbol on the left.
Important notes Protecting the display screen Do not pour liquids on the device or wash it with a heavily soaked cloth. Do not place items on the top of the screen, or damage may occur. During normal use of the device, small particles from the environment can become embedded in the pen tip and scratch the screen. The warranty does not cover a scratched screen. Energy saving Energysaving Energy Notes If you will not be using your Tablet PC, switch it off.
Important notes Travelling with your Tablet PC Mobile operation TabletPC Transportation Notes Please observe the points listed below when travelling with your Tablet PC. Before you travel ► Back up important data stored on your hard disk. ► Switch off the wireless component for data security reasons. With data traffic via a wireless connection, it is also possible for unauthorised third parties to receive data.
Important notes Cleaning the Tablet PC Do not clean any interior parts yourself; leave this job to a service technician. Only use cleaning products designed for computers. Normal household cleaners and polishes can damage the markings on the keyboard and the Tablet, the paintwork or the Tablet PC itself. Please ensure that no liquid enters the Tablet PC. The touchscreen is very sensitive to scratches! Only clean the display surface with a very soft, slightly damp cloth. ► Switch the Tablet PC off.
First-time setup of your device First-time setup of your device Gettingstarted First-timesetup Please read the chapter "Important notes", Page 12. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before you switch on the device for the first time, connect it to the mains voltage using the mains adapter, see "Mains adapter connecting", Page 17.
First-time setup of your device Selecting a location Selectinga location Mainsadapter Device Select a suitable location for the device before setting it up. Follow the instructions below when doing so: • Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can result in damage caused by overheating.
First-time setup of your device Switching on the device for the first time Switchingon for thefirsttime When you switch on the device for the first time, the supplied software is installed and configured. Because this procedure must not be interrupted, you should set aside enough time for it to be fully completed and connect the device to the mains using the mains adapter.
First-time setup of your device ► During installation, follow the instructions on screen. If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device. This information can also be found on the Internet at "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".
Working with the Tablet PC Working with the Tablet PC TabletPC TabletPC,operation This chapter describes the basics for operating your Tablet PC. You can find instructions on how to connect external devices (e.g. mouse, flash memory) to the Tablet PC in the chapter "Connecting external devices", Page 67. Please refer to the notes in "Important notes", Page 12.
Working with the Tablet PC No. 1 2 Status displays Description Power-on indicator • The indicator lights up white: The tablet PC is switched on. • The indicator flashes: The Tablet PC is in sleep mode (Save-to-RAM). • The indicator is not lit: The Tablet PC is switched off or in Save-to-Disk mode. Battery charging indicator Please note: If the mains adapter is connected when the state of charge of the battery is more than 90%, charging will not be started.
Working with the Tablet PC Switching on the Tablet PC TabletPC:switching on Power-onindicator 1 2 2 ► Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicators (2) light up whenever the system is switched on.
Working with the Tablet PC Programming the ON/OFF button You can program the ON/OFF button: Operating system Windows 10 Menu Control Panel - Hardware and Sound - Power Options If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page 57. Switching the Tablet PC off Back up your data and close all applications before you switch off your device.
Working with the Tablet PC elements) on the screen. The maximum permitted number of such faulty pixels is specified in the international standard ISO 9241-307 (Class II). Example: A monitor with an HD resolution of 1280 x 1024 has 1,310,720 pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 3.9 million subpixels in total.
Working with the Tablet PC Select display orientation (portrait or landscape orientation) Displayorientation Portraitorientation Landscapeorientation You can choose to use either portrait or landscape orientation for the display, or whether the display orientation should automatically adapt to the orientation of the Tablet PC. You can change these settings under Control Panel - Hardware and Sound - Windows Mobility Center / Rotate screen.
Working with the Tablet PC Using the pen Pen 1 = pen tip 3 2 = pen button (= right mouse button) 3 = eyelet for optional pen tether 2 1 You can use the pen on your Tablet PC as an electronic writing implement to select items, and to navigate through programs on it. Programs that support handwriting recognition also allow you to write characters directly on the screen with the pen. You can also use the pen as a drawing tool.
Working with the Tablet PC The pen does not support erasing functions. Handling Mouse Selecting menu Click with the left-hand mouse button. items Starting programs Double click with the left-hand mouse button. Moving an Drag with the left-hand mouse button object/window held pressed. Opening a context Click with the right-hand mouse menu button. Moving the cursor - Pen Touch the menu entry with the pen tip. Briefly touch the program icon twice with the pen tip.
Working with the Tablet PC Calibrating the pen Via the operating system, you must calibrate your tablet PC before first use with the pen, so that it recognises the pen as accurately as possible. You should also always repeat the calibration if the co-ordination between the pen and cursor movement deteriorates. Operating system Windows 10 Menu To calibrate, call up the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats.
Working with the Tablet PC Tablet buttons In addition to the ON/OFF button (4), your tablet PC is also equipped with three tablet buttons. 1 No. 1 2 3 Description Shortcut button Volume down button Volume up button 2 3 4 Functions Start function manager or screen shot function Decrease the volume Increase the volume If the Windows button of the tablet PC is pressed in combination with the ON/OFF button (4), this corresponds to the key combination Ctrl + Alt + Del on a keyboard.
Working with the Tablet PC Rechargeable battery Life,battery Battery Rechargeablebattery For mobile use, the built-in battery provides the Tablet PC with the necessary power. You can increase the life of the battery by caring for the battery properly. The average battery life is around 500 charge/discharge cycles. You can extend the battery life by taking advantage of the available energy saving functions.
Working with the Tablet PC Using the power-management features Battery Power The Tablet PC uses less power when the power management features are enabled. You will then be able to work longer when using the battery before having to recharge it. Power efficiency is increased and environmental pollution reduced. By choosing the best power options, you can make significant savings and at the same time help protect the environment. ► Select the power management functions in your Control Panel.
Working with the Tablet PC Inserting the memory card ► Open the slot cover (1). ► Carefully push the memory card into the slot (2). The label area must be facing downwards. Do not apply any force, otherwise the delicate contact surfaces could be damaged. ► Close the slot cover. Memory card 2 1 3 Removing the memory card Memorycard To avoid any loss of data, always follow the correct procedure for removing the card (see the documentation for your operating system). ► Open the slot cover (1).
Working with the Tablet PC SIM card A SIM card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or Tablet PC and, together with an integrated UMTS/LTE module, enables access to a mobile network. Please follow the instructions supplied by the provider when handling the SIM card. If you do not feel the SIM card engage as you insert it, use a pointed object to insert the SIM card. Please note that the SIM card format must be micro-SIM (3FF).
Working with the Tablet PC Removing the SIM card 1 2 4 ► Open the slot cover (1). ► Pull the SIM card holder out of the slot (2). ► Remove the SIM card from the SIM card holder (3). ► Push the SIM card holder back into the slot (4). ► Close the slot cover. 3 Wireless LAN / Bluetooth / UMTS / LTE / NFC wireless components (dependent on configuration) The installation of wireless components not approved by Fujitsu will invalidate the certifications issued for this device.
Working with the Tablet PC Access via UMTS / LTE If you ordered an integrated UMTS/LTE module with your system, you can enjoy optimum reception and maximum energy efficiency without any awkward cables or antennas. An installed UMTS/LTE module is ready for immediate use. If you did not order a UMTS / LTE module, you can purchase the accessories for UMTS / LTE reception from your retailer or your Fujitsu Technology Solutions dealer.
Accessories for your Tablet PC (optional) Accessories for your Tablet PC (optional) The following accessories are available for your Tablet PC: • Cradle for charging the tablet PC and with additional ports • Keyboard dock with additional ports (with or without battery) • VESA mount • Hand strap • Shoulder strap • Cover The following sections provide more information on handling the accessories.
Accessories for your Tablet PC (optional) Your cradle (optional) As well as providing rapid charging, your cradle is a device which helps you to quickly connect your tablet PC to your peripheral devices, such as a display, keyboard, mouse, etc. You only need to dock the tablet PC in order to work with your peripheral devices. Cradle components Cradle Ports 1 5 6 7 2 3 4 1 = Release button 2 = Connector on the cradle for the docking port of the Tablet PC 3 = USB port 3.0 4 = USB port 3.
Accessories for your Tablet PC (optional) Connecting the Tablet PC to the cradle It is possible to connect the Tablet PC to the cradle while it is operating. Disconnect the mains adapter from the Tablet PC before connecting the Tablet PC to the cradle. If the tablet PC is connected to the cradle, you must connect the mains adapter to the cradle in order to be able to use all of the cradle’s functions. cradle ► Remove the power plug of the mains adapter from the mains socket.
Accessories for your Tablet PC (optional) ► Plug the power cable into the mains socket (4). Disconnecting the Tablet PC from the cradle It is possible to separate the Tablet PC from the cradle during operation. 2 1 ► Push the release button in the direction of the arrow (1) until it remains in the pressed position (red marking becomes visible). ► Lift the Tablet PC from the cradle in the direction of the arrow (2), while supporting the underneath of the cradle.
Accessories for your Tablet PC (optional) Connections on the keyboard dock Ports Keyboarddock 1 2 34 65 7 13 12 11 10 9 8 1 = Release button 2 = Num Lock indicator (switch virtual keypad on and off) 3 = Caps Lock indicator (switch upper case writing function on and off) 4 = Scroll indicator (Scroll Lock, function depends on application program) 5 = Battery indicator of the battery in the keyboard dock (optional) 6 = Battery charging indicator of the battery in the keyboard dock (optional) 40 7 8
Accessories for your Tablet PC (optional) Status indicators of the keyboard dock with additional battery Status indicators Battery indicator Description The battery indicator shows the state of charge of the battery. • Battery charging indicator The indicator lights up white: The battery is between 50% and 100% charged. • The indicator lights up orange: The battery is between 13 % and 49 % charged. • The indicator light is red: The battery is between 0% and 12% charged.
Accessories for your Tablet PC (optional) Connecting the Tablet PC to the keyboard dock If the Tablet PC is connected to the keyboard dock, you can connect the mains adapter to either the keyboard dock or the Tablet PC. Keyboarddock ► Position the keyboard dock as shown. 2 1 4 3 ► Press the tablet PC onto the keyboard dock in the direction of the arrow (1), until you feel it engage on the connector. ► Plug the mains adapter cable into the DC input connector (DC IN) on the keyboard dock (2).
Accessories for your Tablet PC (optional) Disconnecting the Tablet PC from the keyboard dock It is possible to separate the tablet PC from the keyboard dock during operation. To prevent problems, we recommend that you execute the appropriate undocking function provided by the operating system. 2 1 ► Press and hold the release button (1) until it remains in the pressed position (red marking becomes visible). ► Lift the tablet PC away from the keyboard dock in the direction of the arrow (2).
Accessories for your Tablet PC (optional) Removable battery of the keyboard dock (optional) Life,battery Battery Rechargeablebattery Removing and installing the battery Only use batteries approved by Fujitsu for your tablet PC. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections. Never store a battery for longer periods in the discharged state. This can make it impossible to recharge.
Accessories for your Tablet PC (optional) 1 1 2 ► Undo the catches of the battery cover and open the battery cover (1). ► Lift the battery towards the recess in the centre of the battery compartment and remove the battery from the battery compartment (2).
Accessories for your Tablet PC (optional) Installing the battery 1 3 3 2 2 ► Position the battery at the edge of the battery compartment and insert the battery in the battery compartment (1). ► Insert the catches of the battery cover into the openings on the device (2). ► Close the battery compartment cover (3).
Accessories for your Tablet PC (optional) VESA mount (optional) For models with screw holes and SmartCard readers on the back, you can attach an optional VESA mount. Use the VESA mount to secure the tablet PC, e.g. to a monitor with corresponding screw holes. The VESA mount kit includes the following components: VESA mount, two M2x8 screws and two spacers.
Accessories for your Tablet PC (optional) • • Use a suitable tool of the correct size when fitting the screws. Keep the screws out of the reach of children. 1 1 1 1 2 2 2 2 4 4 3 4 4 ► Remove the covers from the screw holes on the rear of the tablet PC (1). ► Position the spacers between the tablet PC and the VESA mount (2).
Accessories for your Tablet PC (optional) ► Position the VESA mount on the tablet PC (3). Make sure that the screw holes of the VESA mount and of the tablet PC line up exactly above one another. ► Secure the VESA mount with the screws (4).
Accessories for your Tablet PC (optional) Hand strap (optional) For models with screw holes and SmartCard readers on the back, you can attach an optional wrist strap. The hand strap kit includes the following components: Hand strap, two M2x6 screws, two M2x8 screws and two spacers.
Accessories for your Tablet PC (optional) • • • Use a suitable tool of the correct size when fitting the screws. Keep the screws out of the reach of children. Do not shake the device too much when you hold it by the hand strap, otherwise it could fall down. 1 1 2 2 4 4 3 ► Remove the covers from the screw holes on the rear of the tablet PC (1). ► Position the spacers between the tablet PC and the hand strap (2). ► Put the hand strap in position on the tablet PC (3).
Accessories for your Tablet PC (optional) Only use the M2x8 screws to secure the hand strap. ► Secure the hand strap with the screws (4).
Accessories for your Tablet PC (optional) Shoulder strap (optional) For models with screw holes and SmartCard readers on the back, you can attach an optional shoulder strap. The shoulder strap kit includes the following components: Shoulder strap, two mountings, two M2x6 screws, two M2x8 screws and two spacers.
Accessories for your Tablet PC (optional) • • • Use a suitable tool of the correct size when fitting the screws. Keep screws and mountings out of the reach of children. To avoid damaging the screws, do not use an electric screwdriver. 1 1 2 2 3 3 ► Remove the covers from the screw holes on the rear of the tablet PC (1).
Accessories for your Tablet PC (optional) Only use the M2x8 screws to secure the mountings. ► Position spacers under the mountings, position the mountings on the rear of the tablet PC and secure the mountings with the screws (2). ► Secure the shoulder strap on the mountings (3).
Accessories for your Tablet PC (optional) Cover (optional) If you are using the cover, never connect the tablet PC to the keyboard dock. ► Place the Tablet PC on the cover as shown.
Security functions Security functions Securityfunctions Your Tablet PC has several security features that you can use to secure your system from unauthorised access. This chapter explains how to use each function, and what the benefits are. Please remember that in some cases, for example, forgetting your password, you may be locked out and unable to access your data. Therefore, please note the following information: • • Back up your data on external data carriers at regular intervals.
Security functions Setting up the fingerprint sensor (dependent on configuration) Fingerprintsensor Whether or not your device has a fingerprint sensor depends on the device configuration you have ordered. The fingerprint sensor can record an image of a fingerprint. With additional fingerprint software, this image can be processed and used instead of a password. 1 1 ► You must install the fingerprint software in order to be able to use the fingerprint sensor (1).
Security functions Using the Security Lock Anti-theftprotection SecurityLock Your device comes with a Security Lock mechanism for the Kensington Lock Cable. With the Kensington Lock Cable, a sturdy steel cable, you can protect your device and your Port Replicator from theft. The Kensington Lock Cable is available as an accessory. ► Fit the Kensington Lock Cable to the corresponding device on your equipment.
Security functions Protecting BIOS Setup Utility (supervisor and user password) If you have opened these operating instructions on the screen, we recommend that you print them out. You cannot call the instructions onto the screen while you are setting up the password. BIOS SetupUtility The supervisor password and the user password both prevent unauthorised use of the BIOS Setup Utility.
Security functions Removing passwords To remove a password (without setting a new password) perform the following steps: User password Supervisorpassword Password ► Start the BIOS Setup Utility and go to the Security menu. ► Highlight the Set Supervisor Password or Set User Password field and press the Enter key. You will be requested to enter the current password by the Enter Current Password prompt. You will be requested to enter a new password by the Enter New Password prompt.
Security functions Password protection for the hard disk Passwordprotection: The hard disk password prevents unauthorised access to the hard disk drives and is checked internally each time the system is booted. The prerequisite for this is that you have assigned at least the supervisor password. Activating hard disk protection ► Call up the BIOS Setup and select the Security menu.
Security functions SmartCard reader (dependent on configuration) Depending on the selected model, your device may be equipped with a SmartCard reader (only available on models with screw holes and a SmartCard reader). Securityfunctions Securityfunctions, SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
Security functions Inserting the SmartCard Depending on the selected model, your device may be equipped with a SmartCard reader (only available on models with screw holes and a SmartCard reader). Do not use force when inserting and removing the SmartCard. Make sure that foreign objects do not fall into the SmartCard reader. 1 ► Push the SmartCard into the SmartCard reader with the chip facing the rear of the Tablet PC.
Security functions Trusted Platform Module - TPM (dependent on configuration) Trusted Platform Module TPM To use the TPM, you must activate the TPM in the BIOS Setup before the software is installed. The condition for this is that you have assigned at least the supervisor password (see "Security functions", Page 57). Enabling TPM • ► ► ► Requirement: You have set a supervisor password, see "Security functions", Page 57. Call up the BIOS Setup and select the Security menu.
Security functions Enable password entry using the on-screen keyboard (on-screen keyboard for BitLocker password) If TPM is enabled, you can enable an OnScreen keyboard for the internal touchscreen in the BIOS Setup. ► Call BIOS Setup and select the Advanced menu. ► Mark Boot Configurations and press the enter key. ► From the UEFI Boot On-Screen Keyboard Location selection, choose the option Lower Right or Upper Right. ► In the Exit menu, choose the option Exit Saving Changes.
Connecting external devices Connecting external devices Under all circumstances, please observe the safety notes provided in the "Important notes", Page 12 chapter before connecting or disconnecting any devices to or from your Tablet PC. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug.
Connecting external devices HDMI port (keyboard dock only) HDMIport The HDMI port can be used to connect an external amplifier, LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port. Some LCD televisions have only two loudspeaker ports and therefore cannot reproduce Dolby Digital or DTS. To play back HDMI sound, you must change the HDMI sound settings accordingly.
Connecting external devices VGA monitor port (only cradle and keyboard dock) An analogue monitor is connected to the analogue VGA monitor port. The display output is limited to a maximum of two screens at the same time. VGAconnection socket Monitor Monitorport Screenport ► Switch off the Tablet PC and the external monitor. ► Plug the data cable of the external monitor into the monitor port. ► First switch on external monitor and then the Tablet PC.
Connecting external devices Connecting USB devices USBports On the USB ports, you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect devices while your operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbit/s. USB 2.0 has a data transfer rate of up to 480 Mbit/s. USB 3.0 has a data transfer rate of up to 5 Gbit/s.
Connecting external devices Connecting external audio devices Your Tablet PC has a combined headphone and microphone port, your (optional) cradle has separate ports for headphones and a microphone. Connecting headphones or other audio output devices Connectingaudio devices Connectingheadphones Audioports The combined headphone and microphone port of the tablet PC or the headphone port of the cradle (optional) allows you to connect output devices such as headphones, external speakers, etc.
Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility System Setup Configuration,BIOSSetupUtility Hardwareconfiguration settings,BIOSSetupUtility configuration To navigate more easily in the BIOS Setup Utility, you can use an external USB keyboard. The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the Tablet PC. When it is delivered, the Tablet PC is set to factory default settings.
Settings in BIOS Setup Utility Operating BIOS Setup Utility BIOS SetupUtility Press the F1 key to display help on the operation of the BIOS Setup Utility. The description of the individual settings is shown in the right-hand window of the BIOS Setup Utility. With the F9 key you can load the default settings of the BIOS Setup Utility. ► Use the cursor keys ← or → to select the menu you wish to access to make changes. The menu is displayed on the screen.
Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtility You need to select the desired option in the Exit menu and activate it by pressing the Enter key: Exit Saving Changes - save changes and exit BIOS Setup Utility ► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The Tablet PC is rebooted and the new settings come into effect.
Troubleshooting and tips Troubleshooting and tips Fault Tips Troubleshooting Follow the safety notes in the "Safety/Regulations" manual when connecting or disconnecting cables. If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. ► Switch the Tablet PC off. ► Please contact the Hotline/Service Desk.
Troubleshooting and tips Executing a reset If the device no longer responds to your inputs, select one of the following options: Forced shut down ► Keep the ON/OFF button pressed for at least 4 seconds. The device will shut down. You can then restart it. Carry out a battery reset ► Shut down the device. If the device does not respond, you may have to force the shutdown, as described in the previous section. ► Disconnect the mains adapter from the device.
Troubleshooting and tips Battery charging indicator not lit Cause The battery is not being charged. Fault elimination ► Connect the Tablet PC to a mains outlet using the mains adapter. Note: The battery will only be charged again when the battery capacity is less than 90%. The Tablet PC’s touchscreen remains dark touchscreenis too dark Touchscreen Cause Touchscreen is switched off. External monitor or television set connected. Troubleshooting ► Press a key (external keyboard) or tap on the touchscreen.
Troubleshooting and tips The external monitor remains blank Monitor Cause Monitor is switched off. Power saving has been activated (monitor is blank). Brightness is set to dark. Screen output is set on the Tablet PC’s touchscreen. The external monitor’s power cable or data cable is not connected properly. Troubleshooting ► Switch the external monitor on. ► Press a key (external keyboard) or tap on the touchscreen. ► Adjust the brightness of the monitor.
Troubleshooting and tips Pen input not working Cause Incorrect driver installed. Troubleshooting ► If your device is one which can only be operated using the pen, install the driver for the standard model. or ► If your device is one which can be operated using the pen and by finger, install the driver for the "Dual Digitizer" model. The Tablet PC does not start after switch on TheTabletPC Cause The battery is dead. Troubleshooting ► Charge the battery. or The power adapter is not connected correctly.
Troubleshooting and tips The printer does not print Printer doesnotprint Cause The printer is not switched on. The printer is not connected correctly. The printer driver is faulty or not correctly installed, or it is the wrong printer driver. Troubleshooting ► Make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer). ► Check that the data cable connecting the Table PC to the printer is properly connected.
Troubleshooting and tips SmartCard reader is not recognised. Cause Chip card inserted incorrectly. Troubleshooting ► Make sure you have inserted your SmartCard into the SmartCard reader with the chip facing upwards/downwards (device-dependent). ► Check whether the SmartCard you are using is supported. Your SmartCard must comply with the ISO standard 7816-1, -2, -3 and -4.
Troubleshooting and tips Acoustic warnings Acoustic error messages Errors Cause A beep sounds every few seconds. Troubleshooting ► Charge the battery. The battery is almost flat.
Troubleshooting and tips Error messages on the screen Error message: messages onthescreen This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programmes are described in the relevant documentation. If the error message appears repeatedly, despite troubleshooting measures, please contact the place of purchase or our customer service centre.
Troubleshooting and tips Error message/cause Real time clock error nnnnK Shadow RAM failed at offset: xxxx Failing Bits: zzzz System battery is dead - Replace and run SETUP System cache error - Cache disabled System timer error Resolution ► Contact your sales service centre. ► Contact your sales service centre. ► Contact your sales service centre. ► Contact your sales service centre. ► Contact your sales service centre.
Technical data Technical data Tablet PC General Processor Main memory (SO DIMM) Electrical data Safety regulations complied with Protection class Maximum power consumption (when the tablet PC is switched on, is connected to the keyboard dock with battery, and the battery is charged): Touchscreen Size Resolution Pixel class Brightness control Technology Digitizer and glass panel Cameras Graphics card Chip Maximum resolution on external display: Dimensions Width x depth x height Weight dependent on configur
Technical data Docking port Micro HDMI port USB (Universal Serial Bus) Security Lock device Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Transport temperature (2K2) 86 1 1 1 1 x x x USB 2.0, 1 x USB 3.0 x 7K1 7M2 5 °C .... 35 °C / 41 °F .... 95 °F –15 °C .... 60 °C / 5 °F ....
Technical data Screen resolutions for integrated screen and external screens Max.
Technical data Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/". Rated voltage Rated capacity 3-cell lithium polymer battery 4250 mAh 10.8 V 46 Wh 65 W mains adapter for the tablet PC Technicaldata Rated voltage Max. rated current 19 V 3.42 A An additional mains adapter or power cable can be ordered at any time.
Technical data Keyboard dock (optional) Electrical data Safety regulations complied with Protection class Ports Docking port USB (Universal Serial Bus) VGA monitor port LAN port HDMI port Environmental conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Temperature during transportation CE II 16-pin 3 x USB 3.0 1x 1x 1x 7K1 7M2 5 °C .... 35 °C / 41 °F .... 95 °F –15 °C .... 60 °C / 5 °F ....
Technical data Shoulder strap (optional) Dimensions Width x Depth x Height 1,265 mm x 25 mm x 4.8 mm / Weight 49.80 in. x 0.98 in. x 0.189 in. approx. 33.4 g / 0.074 lbs. Cover (optional) Dimensions Width x Depth x Height 460 mm x 273 mm x 16 mm / Weight 18.11 in. x 10.75 in. x 0.63 in. approx. 390 g / 0.86 lbs.
Manufacturer’s notes Manufacturer’s notes Disposal and recycling Notes You can find information on this subject on your Tablet PC or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Declarations of Conformity Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx".
Manufacturer’s notes CE marking Lowvoltagedirective Electromagneticcompatibility Notes CEmarking The shipped version of this device complies with the requirements of EC directives 2004/108/EC "Electromagnetic compatibility", 2006/95/EC "Low voltage directive", 2011/65/EU "RoHS directive" and 2009/125/EC "ecodesign directive" (from 20/04/2016: 2014/30/EC "Electromagnetic Compatibility" and 2014/35/EC "Low Voltage Directive").
Manufacturer’s notes Radio frequencies used RF module BT NFC WLAN WLAN WLAN 1 2 3 4 5 6 7 GSM UMTS LTE LTE 8 9 Frequency band 2400-2480 MHz 13.56 MHz 2410-2480 MHz 5150-5350 MHz class 2 5470-5725 MHz class 1 850 MHz, 900 MHz 1900 MHz, 1800 MHz 2100 MHz, 2600 MHz 850 MHz, 900 MHz Max.
Manufacturer’s notes • Connect the equipment into an outlet that is on a different circuit than the receiver. • Consult the dealer or an experienced radio/TV technician for help. Notice to Users of the US Telephone Network Your Tablet PC may be supplied with an internal modem which complies with Part 68 of the FCC rules. On this Tablet PC is a label that contains the FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment among other information.
Manufacturer’s notes • • Public transportation terminals where telephones are used to call taxis or to reserve lodging or rental cars. In hotel and motel rooms as at least ten percent of the rooms must contain hearing aid-compatible telephones or jacks for plug-in hearing aid compatible telephones which will be provided to hearing impaired customers on request.
Manufacturer’s notes Avant de connecter cet équipement à une ligne téléphonique, l’utilisateur doit vérifier s’il est permis de connecter cet équipement aux installations de télécommunications locales. L’utilisateur est averti que même la conformité aux normes de certification ne peut dans certains cas empêcher la dégradation du service. Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada.
Manufacturer’s notes FCC Regulatory information for Tablet PCs with radio device Regulatoryinformation Federal Communications Commission statement This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
Manufacturer’s notes Regulatory Information/Disclaimers Installation and use of this radio device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
Index Index A Acoustic error messages 82 Anti-theft protection 59 Audio devices, connecting 71 Audio ports 71 energy saving 13 Energy saving 13 Energy saving mode leaving 79 Error message: on the screen 83 Error messages on the screen Errors Acoustic warnings 82 Ethernet LAN 35 B Battery battery life 30, 44 caring for and maintaining 30 charge level 30–31 charging 30 Battery status meter 30 Battery: discharges too quickly 80 Before you travel 14 BIOS Setup Utility calling 72 exiting 74 operating 73 prote
Index Memory card handling 31 inserting 32 removing 32 Microphone, connecting 71 Mobile operation 14 Monitor connecting 69 drifting display 78 remains blank 78 Monitor port see VGA connection socket N Notes 12 CE marking 92 cleaning 15 disposal / recycling energy saving 13 Safety 12 touchscreen 23 transport 14 R Rechargeable battery 30, 44 see Battery 30, 44 Regulatory information Tablet PCs with radio device 97 Tablet PCs without wireless device 69 91 O Operating system activating system protection 61
Index The wireless connection to a network does not work 80 Time not correct 76 Time, daylight savings 76 Tips 75 Touchpad cleaning 15 Touchscreen cleaning 15 difficult to read 77 notes 23 reflected glare 77 remains blank 77 touchscreen is too dark 77 TPM 65 Transport Transport damage 16 Transportation 14 Travel 14 Troubleshooting 75 Fujitsu Trusted Platform Module 65 U USB ports 70 User password changing 60 entering 60 removing 61 V VGA connection socket 69 W Wireless component: safety notes 12 Wire
