User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q7312
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Use the touch screen
- Tablet buttons
- Camera and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card (configuration dependent)
- Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
- Ethernet and LAN (optional, only with keyboard dock or adapter cable)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The wireless connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows
- Technical data
- Manufacturer’s notes
- Index
Settings in BIOS Setup Utility
Erase Disk
Erase Disk is a solution that is integrated into the firmware of the FUJITS U Computer
(UEFI: Unified Extensible Firmware Interface), to d elete all the data from a hard
disk or a solid state drive (SSD) memory module.
This function can be used to permanently delete all data from hard disks or SSD memory
modules, before they a re discarded or the complete com puter system is disposed of.
The function can also be used if hard disks/SSD memory modules must be completely
deleted, e.g. before installing a new operating system.
The application c an only be selected and run if an administrator/supervisor
password has been assigned (Menu BIOS Setup - Security).
Proceed as follows to d
elete data from hard disks/SSD memory modules:
► Call the BIOS Setup wi
th the Administrator/Supervisor password .
► To start the application, select Erase Disk (BIOS Setup - Advanced or BIOS
Setup - Security) and set Start after Reboot.
► Then select Save Ch
anges and Exit in the menu Save & Exit / Exit to initiate
a reboot and start E
rase Disk.
Because of the reb
oot, the Erase Disk will be started. You ha ve the option
to interrupt the
process during the user selection.
► After the application starts, the Administrator/Supervisor password must
be entered for security reasons.
A dialogue field appears in which a particular, several or a ll the hard disks/memory
modules can be selected for deletion. T his depends on the number of hard
disks/SSD storage modules in your system.
► Select the hard disk(s)/SSD memory modules to be deleted. The selected hard
disk(s)/SSD memory modules will be deleted one-by-one .
Erase Disk offers four deletion options, from fast (with one deletion pass) to very
secure (with 35 deletion passes). Depending on the algorithm chosen, the process
can take between ~10 seconds and ~10 minutes per G B:
• Zero Pattern (1 pass)
• German BSI/VS ITR (7 passes)
• DoD 5220.22-M ECE (7 passes)
• Guttmann (35 passes)
SSD dri
ves are securely erased with the Enhanced Secure Erase ATA
comma
nd integra ted in the firmware.
► Select the desired deletion algorithm for the se lected hard disks/SSD memory modules.
78 Fujitsu