User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q7312
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Use the touch screen
- Tablet buttons
- Camera and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card (configuration dependent)
- Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
- Ethernet and LAN (optional, only with keyboard dock or adapter cable)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The wireless connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows
- Technical data
- Manufacturer’s notes
- Index
Security functions
Password protection f or the drive
Passwordprotect ion
The password prevents unauthorized access to the disk drives and is checked
internally each time the system is booted. The prerequisite condition for this is
that you have, as a m inimum, assigned the supervisor password.
Disk drive pro tection activation
► Call up the BIOS Setup and select the Security menu.
If you have not assigned BIOS passwords yet, defin e the supervisor and the user
password now, if desired (see "
Securit y functions", Page 62).
► Mark the Hard D isk Security field and press the Enter key.
► In th e Drive0 area mark the Set Master Password field and press the Enter key.
Enter n ew Password then appears and you are asked to enter a password.
► Enter the password and press the Enter key.
Confirm new Password requires y ou to confirm the password.
► Enter the password again and press the Enter key.
Setup Notice: Changes have been saved is displayed to confirm that the
new password has been saved.
The field Password Entry on Boot is set to Enabled by default. You can e xit the BIOS
Setup once you have finished changing the settings.
► From the Exit menu, cho ose the option Exit Saving Changes.
► Press the Enter key and select Ye s.
The Tablet PC re boots and your disk drive is now password protected. The password
prompt is enabled as soon as the Tablet PC has rebooted.
Disk drive protection removal
To cancel a password without setting a new one, proce ed as follows:
► Call up the BIOS Setup and select the Security menu.
► Mark the Hard D isk Security field and press the Enter key.
► In th e Drive0 area mark the Set Master Password field and press the Enter key.
You will be initially requested to enter the old password by the Enter current Password prompt.
You will then be requested to enter a new password by the Enter new Password prompt.
► After providing t he input, press the Enter key three times.
► From the Exit menu, cho ose the option Exit Saving Changes.
► Press the Enter key and select Ye s.
The Tablet P C re boots and there is no longer any password protection for this disk.
Fujitsu 67