User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q7311
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Use the touch screen
- Tablet buttons
- Camera and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card (configuration dependent)
- Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
- Ethernet and LAN (optional, only with cradle, keyboard dock or adapter cable)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Tablet PC
- Screen resolutions for integrated screen and external screens
- Rechargeable battery
- Mains adapter (65 W) for the Tablet PC with/without the keyboard dock
- USB Type-C 65 W mains adapter for the Tablet PC with/without the keyboard docking
- Mains adapter (90 W) for the Tablet PC with cradle
- Cradle (optional)
- Keyboard dock (optional)
- Manufacturer’s notes
- Index
Troubleshooting and tips
Error message/c ause Resolution
CMOS battery bad
If the error message occurs repeatedly, the
buffer battery in the Tablet PC is flat.
► C ontact your sales ou tlet or our
customer
service centre.
System CMOS checksum bad - default configuration
used
The system configuration information is
incorrect.
► Sw itch off t he Tablet PC.
► Sw itch on the Tablet PC.
► In the BIOS Setup, select t
he Exit me nu.
► Se lect th e entry Load Setup Defaults.
► Select OK and press the En
ter key.
Extended memory failed
at offset: xxxx Failing Bits:
zzzz zzzz
When testing the exten
ded memory an error has
resulted at the addre
ss xxxx.
► C ontact your sales ou tlet or our customer
service centre.
Failure Fixed D isk
n
The settings of th
e hard disk drive are incorrect.
► Start the BIO S Setup (Primary Master
submenu) and select the correct settings.
Keyboard contro
ller error
► Sw itch off y our Tablet PC using the ON/OF F
button.
► Wait 3 - 5 seco nds and switch on the Tablet
PC again.
Keyboard error
If you are using an external keyboard:
► C heck the connection and reboot the Tablet
PC.
nn Stuck key
► M ake sure that no key is pressed.
Operating system not found
► C heck in the BIOS Setup whether your hard
disk has been set correctly.
► Make sure t
hat the operating system is
installe
d on the corresponding drive.
Press <F1> to resume, <F2> to SETUP
This error message appears if an error occurs
during the s elf-test before starting the operating
system.
► Press the volume up button to start BIO S
Setup.
or
► If you a
re working with an external
keybo
ard, press the
F1
or
F2
key on
the ke
yboard.
Real
time cloc k error
► C ontact your sales ou tlet or our customer
service centre.
nnnnK Shadow RAM failed at offset: xxxx Failing
Bits: zzzz
► C ontact your sales ou tlet or our customer
service centre.
System battery is dead - Replace and r un SETUP
► Co
ntact your sales outlet or our customer
se
rvice centre.
S
ystem ca che error - Cache disabled
► C ontact your sales ou tlet or our customer
service centre.
S
ystem tim er error
► C ontact your sales ou tlet or our customer
service centre.
Fujitsu 85