User manual

Troubleshooting and tips
The printer does not print
Printerdoesnot print
Cause Tro ubleshooting
The printer is not switched on. ► Make sure that the printer is sw
itched
on and ready for operation (ref
er to th e
documentation supplied with t
he printer).
The printer is not connecte d c
orrectly.
► Ch eck that the data cable conn ecting
the Table PC to the printer is properly
connected.
The printer drive r is faulty or not co rrectly
installed, or it is the wrong printer driver.
► Ch eck that the data cable conn ecting
the Tablet PC t o the printer is prope rly
connected.
► Ch eck whether the correct printer driver is
loaded (refer to the printer documentation).
The wireless connec
tiontoanetworkdoesnotwork
Thewireless conne
ctiontoan etworkdoes notwork
Cause Tro ubleshooting
The wireless compo
nent is disabled.
► Switch the wireless component on (see
"
Switch ing the wireless components on and
off", Page 38).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
► Ch eck whether the wireless connect ion is
switched on via the software.
► F urther information on using the wireless
component can be found in the help files.
The battery d
ischarges too quickly
Battery:
Cause
Troubleshooting
The battery
is either too hot or too cold. In this
case the bat
tery indicator flashes.
► Bring the Tablet PC up/down to a normal
temperature again.
► If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace battery if necessary.
You may have an application r unning that
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.
► Use the mains adapter as frequently as
possible.
The maximum brightness may have been set
for the screen.
► Re duce the brightness of the screen to
lower energy consumption: You w ill find the
setting unde r Control Panel – Hardware and
Sounds – Windows Mobility Center.
82 Fujitsu