User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q7311
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Use the touch screen
- Tablet buttons
- Camera and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card (configuration dependent)
- Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
- Ethernet and LAN (optional, only with cradle, keyboard dock or adapter cable)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Tablet PC
- Screen resolutions for integrated screen and external screens
- Rechargeable battery
- Mains adapter (65 W) for the Tablet PC with/without the keyboard dock
- USB Type-C 65 W mains adapter for the Tablet PC with/without the keyboard docking
- Mains adapter (90 W) for the Tablet PC with cradle
- Cradle (optional)
- Keyboard dock (optional)
- Manufacturer’s notes
- Index
Settings in BIOS Setup Utility
Erase Disk
Erase Disk is a solution that is integrated into the firmware of the FUJITSU Computer (UEFI: Unified
Extensible Firmware Interface), to delete all the data from a hard disk or solid state drive (SSD).
This function can be used to delete all data from internal ha rd disks or SSDs, before the hard disks
are discarded or the complete computer system is disposed of. The function can also be used if
hard disks m ust be c ompletely deleted, e.g. before installing a new operating system.
The application can only be selected and run if an administrator/supervisor
password has been assigned (Menu BIOS Setup - Security).
To erase data from SATA h
ard disks or SSDs, proceed as follows:
► Call the BIOS Setup with
the Administrator/Supervisor password.
► To start the application, select Erase Disk (BIOS Setup - Advanced or BIOS
Setup - Security)andsetStart after Reboot.
► Then select Save Cha
nges and Exit in the menu Save & Exit / Exit to initiate
a reboot and start Er
ase Disk.
Because of the rebo
ot, the Erase Disk will be started . You have the option
to interrupt the pr
ocess during the user selection.
► After the application starts, the Administrator/Supervisor password must
be entered for security reasons.
A dialogue field appears in which a particular, several or all the hard disks can be selected
for deletion. This depends on the number of hard disks in your system.
► Select the hard disk(s) to be deleted. The selected hard disk(s) will be deleted one-by-one.
Erase Disk offers four deletion options, from fast (with one deletion pass) to very
secure (with 35 deletion passes). Depending on the algorithm chosen, the process
can take between ~10 seconds and ~10 minutes per GB:
• Zero Pattern (1 pass)
• German BSI/VS ITR (7 passes)
• DoD 5220.22-M ECE (7 passes)
• Guttmann (35 passes)
SSD driv
es are securely erased with the Enhanced Secure Erase ATA
command
integrated in the firmware.
► Select the desired deletion a lgorithm for the selected hard disks.
Fujitsu 75