User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q7311
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Use the touch screen
- Tablet buttons
- Camera and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card (configuration dependent)
- Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
- Ethernet and LAN (optional, only with cradle, keyboard dock or adapter cable)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Tablet PC
- Screen resolutions for integrated screen and external screens
- Rechargeable battery
- Mains adapter (65 W) for the Tablet PC with/without the keyboard dock
- USB Type-C 65 W mains adapter for the Tablet PC with/without the keyboard docking
- Mains adapter (90 W) for the Tablet PC with cradle
- Cradle (optional)
- Keyboard dock (optional)
- Manufacturer’s notes
- Index
Connecting external devices
VGA monitor port (cradle only)
An analogue monitor is connected to the analogue VGA monitor port. The screen output
is limited to a maximum of two exte rnal screens at the same time.
MonitorVGAconnection socketScreenportMonitorport
► Switch off the Tablet PC and the
external monitor.
► Plug the data cable o f the external
monitor into the monitor port.
► First switch on external monitor and
then the Tablet PC.
You can also switch back and forth between the external monitor and the LCD
screen of the Tablet PC, see "
Touch screen", Page 24.
You can display the same picture on the external monitor and the LCD
screen of the Tablet PC simultaneously.
68 Fujitsu