User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q7310
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Use the touch screen
- Tablet buttons
- Camera and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card (configuration dependent)
- Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
- Ethernet and LAN (optional, only with cradle, keyboard dock or adapter cable)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Manufacturer’s notes
- Index
Connecting e xtern a l devices
Display port (cradle only)
Displayport
The display port of the cradle ca n be used to connect a display, LCD TV or a plasma TV with an
appropriate port. The screen output is limited to a maximum of two external screens at the same time.
► Connect the data cable to the
external device.
► Con nect the data cable to the display
port of the cradle.
Some LCD televisions have only two loudspeaker connections and therefore
cannot reproduce Dolby Digital or DTS. In order to reproduce the sound, you
must go into Windows and adjust the sound settings.
► To do this, deactivate the DTS A udio and Dolby Digital settings in the control
panel for th e Realtek HDMI Output.
Fujitsu 65