Operation Manual

Manufacturer’s notes

Please note the following regulatory information related to the optional radio device.

FCC Radio Frequency Exposure statement

This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the

requirements as set forth in CFR 47 Sect ions 2.1091, 2.1093, and 15.247 (b) (4) addressing RF

Exposure from radio frequency devices. T he radiated output power of this radio device is far below

the FCC radio frequency exposure limits. N evertheless, this device shall be used in such a manner

that the potential for human contact during normal operation is minimized. When using this device, a

certain separation distance between antenna and nearby persons must be maintained to ensu re RF

exposure compliance. In order to comply with RF e xposure limits established in the ANSI C95.1

standards, the distance between the antennas and the user should not be less tha n 20 cm (8 inches).

Regulatory Notes and Statements

Radio device, health and authorisation for us e

Radio-frequency electromagnetic energy is emitted from the wireless devices. The energy levels

of the se emissions, however, are far much less than the electromagnetic energy emissions from

wireless de vices such as mobile phones. Radio devices are safe for use by consumers because

they operate within the guidelines found in radio frequency safety standards and recommendations.

The use of the radio devices may be restricted in some situations or environments, such as:

• on board an airplane, or

• in an explosive environment, o r

• in situations where the interference risk to other devices or services is

perceived or identiﬁed as harmful.

In cases in which the policy regarding use of radio devices in speciﬁc environments is not

clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain

authorization to use these devices prior to operating the equipment.

Regulatory Informati on/Disclaimers

Installation and use of this radio device must be in s trict accordance with the instructions included

in the user documentation provided with the produ ct. Any changes or modiﬁcations made to this

device that are not expressly approved by the manufacturer may void the user’s authority to operate

the equipment. The m anufacturer is not responsible for any radio or television interference caused

by unauthorized mo diﬁcation of this device, or the substitution or attachment of connecting cables

and equipment other than those speciﬁed by the ma nufacturer. It is the responsibility of the user

to correct any interference caused by such una uthorized modiﬁcation, substitution or at tachment.

The manufacturer and its authorized resellers or distributors will assume no liability for any damage

or violation of government regulations arising from failure to comply with these guide lines.

Export restriction s

This product or software contains encryption code which may not be exported or

transferred from the US or Canada without an ap proved US Departme nt of Commerce

export license. This d evice complies with Part 15 of FCC Rules, as well as ICES 003 B

/ NMB 003 B. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesirable operation.

Modiﬁcations not expressly authorised by Fujitsu Technology Solutions may

invalidate the user’s right to operate this equipment.

Fujitsu 93