Operation Manual

Connecting e xtern a l devices
Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"
Important notes", Page 12 chapter before connecting or disconnecting
any devices to or from your Tablet PC.
Always read the documentation supplied with the device you wish to connect.
Never con nect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Adhere to the order described below when you connect external devices
to the Tablet P C or separate them from it:
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special d rivers (see the operating
system and external device documentation).
Connecting devices to the Tablet PC (o r to the Cradle / Keyboard Do ckin g).
1. Switch off the Tablet PC and all external devices.
2. Remove the mai
ns plug for the Tablet PC and all relevant devices from the sockets.
3. Connect the cables for your external devices following the instructions.
4. Plug all powe
r cables into the ma ins sockets.
DevicesPeripheralde
vices
Disconnecting devices from the Tablet PC (or from the Cradle / Key bo ard Docking)
1. Switch off the Tablet PC and all external devices.
2. Remove the
mains plug for the Tablet PC and all relevant devices from the sockets.
3. Disconnect the cables for your externa l devices following the instructions.
DevicesPeripheraldev ices
Fujitsu 69