Operation Manual

Accessories for your Tablet PC (opti
onal)
SettinguptheCradle
Select a suitable location for the Cradle before setting it up. Follow
the instructions below when doing so:
• PlacetheCradleonaflat, stable, nonslippery surface.
• Never place the Cradle and the mains adapter on a heat-sensitive surface.
• Do not expo se the Cradle to extreme environmental conditions.
Protect the Cradle from dust, humidity and heat.
Connecting the Tablet PC to the Cradle
It is possible to connect the Tablet PC to the Cradle during operation. To prevent
problems, w e recommend that you switch the Tablet PC off first.
Disconnect the mains adapter from the Tablet PC before connecting
the Tablet PC to the Cradle.
If the Tablet PC is c
onnected to the Cradle, you must connect th e
mains adapter to t
he Cradle.
Information when
using the Cradle:
• When your Tablet
PC is connected to the Cradle, the micro USB port
on the device ca
nnot be used at the same time. Use the alternative
interfaces on t
he Cradle in this c ase.
• The HDMI and VGA port on the t he Cradle cannot be used at the
same time: if devices are connected to both VGA and HDMI port, only
the device on the HDMI port can be used.
• The supported max. VGA/HDMI resolution is 1920 x 1080 pixels.
Cradle
► Switch off the Ta blet PC.
► Remove the power plug of the mains adapter from the mains socket.
► Pull the mains adapter cable out of the DC jack (DC IN) of the Tablet PC.
48 Fujitsu