Instruction Manual

Appendix
Recovering Your Recovery Image Using Recovery and Utility
(for new hard drive or non-boot
able hard drive)
If you ha ve installed a new hard drive or your hard drive is not bootable, perform the following steps.
Note: You will need t he Boo table disk and Recovery Image disk set for this recovery.
1. Power on your system. When the Fujitsu logo appears on the screen, press the
Enter
key.
2. Insert the bootable disk in your D V D drive, then click OK.
3. Highlight the CD/DVD option from the Boot Menu a nd press
Enter
.
4. Select CD/DVD boot mode: Select UEFI Mode, if applicable and press
Enter
.
While the files are being loaded from the disk, the Fujitsu logo screen appears
followed by a progress bar at the bot tom of the screen.
5. Choose y our language, if necessary.
6. Three tool options appear: Diagnostics, Recovery and Utility.SelectRecove ry.
• For Windows 8.1: Select Restore full hard drive
• For Windows 7: Select Restoring the Factory Image (full hard drive recovery)
7. Click Next to c on firm full hard drive restoration. All data on HDD will be de lete d.
8. Agree to EULA by selecting Agree option and clicking Next.
9. Click Next on the R ecovery Disk C heck scree n to verify that the bootable
disk has been inserted into the optical drive.
10. T he Checking for Recovery Disk screen appears fo llowed by the prompt to insert the
first disk. Click OK to continue. Repeat this step for all disks. After all recovery disks
have been checked and the check has been completed, click Next.
11. Follow the prompt to reinsert the first recovery disk and click Next.
12. Click OK when you r ece ive the final warning informing you that all data on drive
C will be lost. This starts the recovery process.
13. F ollow the prompts to insert the next recovery disks and click OK.
14. Afte r the copying of the image to the HDD completes the restore process is
complete, click Finish to restart the system. T he computer will restart automatically
and then go through the first boot process.
15. F ollow the steps listed in “Aut o Installation s upport for essential access
software from backup location” section.
16. D ownload FSDM (Fujitsu Software Download Manager) from support site and download
all the software applicable to the model an d OS using F SD M .
17. F ollow the steps listed in “Aut o Installation s upport for essential access
software downloaded from support website.
96 Fujitsu