Instruction Manual

Troubleshooting and tips
SmartCard reader is not recognized
Cause
Troubleshooting
Chip card inserted incorrectly.
► Make sure you have inserted your
SmartCard into the SmartCard reader with
the chip facing upwards.
► Check whether the SmartCard you are using
is supported. Your SmartC ard must c omply
with the ISO standard 7816-1, -2, -3 and -4.
Acoustic warning
Acous ticwa rningsErrors
Cause
Troubleshooting
A beep sounds every few
seconds.
The battery is almos
t flat.
► Charge the battery.
Error messages on the screen
Errormessageso
nthescreen
Errors
This section describes the error messages generated by the BIO S Setup. Error messages displayed
by the operating system or programs are described in the d ocumentation for these programs.
If the error message appears repeatedly despite troubleshooting measures,
contact the place of purchase or our customer service c enter.
78 Fujitsu