Instruction Manual

Accessories for yo ur Tablet PC (opti
onal)
Connecting the Tablet PC to the cradle
It is possible to connect the Tablet PC to the cradle while it is running. To prevent
problems, we recommend that you switch the Tablet PC off first.
Disconnect the AC adapter from the Tablet PC before connecting
the Tablet PC to the cradle.
When the Tablet PC is con nected to the cradle, you must connect
the AC adapter to the cradle.
Information for using the performance cradle:
• If your Tablet PC is connected to the performance cradle, the micro USB port of
the Tablet PC cannot be used. Use the alternative ports of the cradle.
• The HDMI and VG A ports of the performan ce cradle cannot be used a t the same time.
If devices are connected to both ports, only the device at the HDMI port can be used.
• The maximum supported resolution for VGA/HDMI is 1920 x 1080 pixels.
Cradle
► Switch the Tablet PC
off.
► Remove the AC plug of the AC ada pter from the power ou tlet.
► Remove the AC adapt
er cable from the DC jack (DC IN) of the Tablet PC.
Fujitsu 43