Operation Manual

Troubleshooting and tips
The cursor does not correctly follow the
pen movements
Cause
Fault elimination
Pen incorrectly calibrated
► Ca librate the pen as described in chapters
"
Setting the pen", Page 33 and "Calibrati ng
the pen" , Page 33.
Pen input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which c an only be
operated using the pen, install the driver for
the standard model.
or
► If your device is on e which can be
operated using the pen and by finger,
install the driver for the "Dual Digitizer"
model.
The Tablet PC do
es not start after switch on
TheTabletPC
Cause Troubleshooti
ng
The batter y is
not installed correctly.
► Ch eck whether the battery is installed
correctly in i ts compartment.
► Switch the Tablet PC on.
The battery is dead.
► Charge the battery.
or
► W hen using with the Keyboard Docking:
Insert a charged battery.
or
► Co nnect the mains a dapter to th e Tablet
PC.
The power adapter is not co nnected correctly.
► Ch eck whether the mains adapter is
connected correctly to the Tablet PC.
► Switch on the Tablet PC.
The battery of the Tablet PC is fully discharged
and the Tablet PC is connected to the attachable
keyboard.
► Co nnect the mains adapter to the Tablet PC.
► Switch on the Tablet PC.
80 Fujitsu