Operation Manual

Connecting e xtern a l devices
Connecting external devices
Under all circumstances, please observe the safety no tes provided in the
"
Important notes", Page 13 chapter before connecting or disconnecting
any devices to or from your Tablet PC.
Always read the documentation supplied with the device you w ish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Adhere to the order described below when you connect ext ernal devices
to the Tablet P C or separate them from it:
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. F or more
information about whether or not devices need to be sw itched off, please refer
to the docum entation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
Connecting devices to the Tablet PC (or to the Cradle / Keyb oard Docking).
1. Switch off the Tablet PC and all external devices.
2. Remove the mai
ns plug for the Tablet PC and all relevant devices from the s ockets.
3. Connect the cables for your external devices following th e instructions.
4. Plug all powe
r cables into the ma ins sockets.
DevicesPeripheral de
vices
Disconnecting devices from the Tablet PC (or from the Cradle / Keyboard Docking)
1. Switch off the Tablet PC and all external devices.
2. Remove the
mains plug for the Tablet PC and all relevant devices from the sockets.
3. Disconnect the cables for your external devices following the instructions.
DevicesPeripheral dev ices
Fujitsu 71