Operation Manual

First-time setup of your device
Selecting a location
SelectingalocationDeviceMains adapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e. g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The und erside of the de vice heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep othe r objects at least 100 mm away from the device and its
mains adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingforo perationMainsadapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied power cable conforms to the requirements of the country in
which you purcha sed your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
When the mains adapter is connected, it may happen that a slight tingling is felt when
the surface of the aluminium casing is touched. The comb ination of a power plug without
an earth cable and metallic casing parts cause a very weak electric current.
This effect is harmless. The device meets all the relevant safety standards.
3
1
2
► Connect the power cable (1) to the
mains adapter.
► Plug the mains cable (2) into a m ains outlet.
► Connect the mains adapter cable (3) to
the DC jack ( DC IN) of the device.
18 Fujitsu