User manual

Tro ubl eshooting and tips
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is sw
itched
on and ready for operation (ref
er to the
documentation s upplied with t
he printer).
The printer is not connected c
orrectly.
► Check t hat the d ata c able between the Tablet
PC and the printer is properly connected.
The printer driver is faulty or not correctly
installed, or it is th e wrong printer driver.
► Check t hat the d ata c able between the Tablet
PC and the printer is properly connected.
► Check whether th e correct printer driver is
loaded (refer to the printer d ocumentation).
The wireless connect
ion to a network does not work
Thewireless conne
ctiontoan etworkdoes notwork
Cause Troubleshooting
The w ireless component is switched off. ► Switch the wireless component on (see
"
Switching the wireless componen ts on and
off", Page 42).
The wireless component is sw itched on . Despite
this, the wireless c onnection to a network does
not work.
► Check whether the wireless connection is
enabled by the software.
► Further information on using the wireless
component can be found in the help files.
The battery di
scharges too quickly
Battery
Cause
Troubleshooting
The battery i
s either too hot or too cold. In this
case the batt
ery indicator flashes.
► Bring the Tablet PC up/down to a n ormal
operating temperature again.
► If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace the battery if necessary.
You may have an application running that
consumes a great deal of power due to frequent
accessing of th e hard disk or optical drive.
► Use the AC adapter whenever possible.
The maximum brightness may have been set
for the screen.
► Reduce the brightness of the screen to
lower energy consumption: You will find the
setting under Control Panel – Hardware and
Sounds – Windows Mobility Center.
Fujitsu 77