Operation Manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q584
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Battery charging indicator
- Switching on the Tablet PC
- Switching off the Tablet PC
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the stylus pen
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN/Bluetooth/UMTS/LTE/NFC radio components
- Ethernet and LAN (only with Multi-functional Cradle)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery indicator does not illuminate
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised
- SmartCard PIN forgotten
- User and/or supervisor SmartCard lost
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Connecting external devices
Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"
Important notes", Page 12 chapter before connecting or disconnecting
any devices to or from your Tablet PC.
Always read the documentation s upplied with the device you wish to connect.
Never c onnect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always gra sp the plug.
Adhere to the order described below when you connect external devices
to the Tablet PC or separate the m from it:
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before conne cting/disconnecting. For m ore
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of th e external devices requ ire special drivers (see the operating
system and external device documentation).
Connecting d evices to the Tablet PC (or to th e Cradle).
1. Switch off the Tab let PC and all external devices.
2. Remove the mai
ns plug for the Tablet PC and all relevant devices from the sockets.
3. Connect the cables for your external device s following the instructions.
4. Plug all powe
r cables into the mains sockets.
DevicesPeripheralde
vices
Disconnecting devices from the Tablet PC (or from the Cradle)
1. Switch off the Tab let PC and all external devices.
2. Remove the
mains plug for the Tablet PC and all relevant devices from the sockets.
3. Disconnect the cables for your external de vices following the instructions.
DevicesPeripheraldev ices
66 Fujitsu