Operation Manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q584
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Battery charging indicator
- Switching on the Tablet PC
- Switching off the Tablet PC
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the stylus pen
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN/Bluetooth/UMTS/LTE/NFC radio components
- Ethernet and LAN (only with Multi-functional Cradle)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery indicator does not illuminate
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised
- SmartCard PIN forgotten
- User and/or supervisor SmartCard lost
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Security functions
Protecting BIOS Setup Utility (supervisor and user password)
If you have opened these operating instructions on the screen, we
recommend that you print them out. You cannot call th e instructions onto
the screen w hile you are setting up the password.
BIOSSetupUtility
The supervisor password and the user password both p revent unauthorised use of the
BIOS-Set up-Utility. W ith the aid of the supervisor password you can access all of the functions of
the BIOS-Setup-Utility, while the user password will only give you access to some of the functions.
You c an only set up a user password if a supervisor password has already been assigned.
Please refer to section "Settings in BIOS Setup Utility", Page 70 for a description
of how to call up and operate the BIOS-Setu p-Utility.
Setting supervisor and user password
► Start the BIOS Setup
Utility and go to the Security menu.
► Select the Set Supervisor Password field and press the En ter key.
With Enter new Pass
word: you are asked to enter a password.
► Enter the password and p ress the Enter key.
Confirm new Passwo
rd requires you to confirm the password.
► Enter the password again and press the Enter key.
Changes have be
en saved is a confirmation that the new password has been saved.
► To set the use r password, select Set User Password and proceed exactly as
when configuring the supervisor password.
Ifyoudonotwa
nt to chang e any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes an
d press the Enter key.
PasswordSupervisor passwordUserpassword
The Tablet PC is rebooted and the new password is effective. It will now be necessary to
first enter your supervisor or user passwo rd in o rder to open the BIOS Setup Utility. Please
note that the user password only provides access to a few of the BIOS settings.
Changing t
he supervisor or user password
You can only change the supervisor password when you have logged into the
BIOS Se tup Utility with the supervisor password.
Passwo
rd
Superv
isorpassword
Userpa
ssword
► Call the BIOS Setup Utility and go to the Security menu.
► When cha
nging the password, proceed exactly as for password assignment.
Fujitsu 61