Operation Manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q584
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Battery charging indicator
- Switching on the Tablet PC
- Switching off the Tablet PC
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the stylus pen
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN/Bluetooth/UMTS/LTE/NFC radio components
- Ethernet and LAN (only with Multi-functional Cradle)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery indicator does not illuminate
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised
- SmartCard PIN forgotten
- User and/or supervisor SmartCard lost
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Working with the Tablet PC
Wireless LAN/Bluetooth/UMTS/LTE/NFC
radio components
The installation of radio components not approved by Fujitsu Techn ology Solutions
will invalidate the certifications issued for th is device.
Switching the wireless components on and off
The wireless components are switched on and off via the corresponding operating system functions.
► To individually switch off and on the wireless components, select Settings –
Change P C settings – Network – Airplane mode.
Setting up WLAN access
• Requirement: A W LAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
NFC
Your Tablet P is optionally e quipped with an integrated NFC chip. Near Field Communication
allows a c ontactless, wireless exchange of data a t a short distance (a few centemetres).
Access v ia U
MTS / LTE
If you ordered an integrated UMT S / LTE module with your system, you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. The
optional UMTS / LTE module is ready for use straight away.
You will find information on establishing the connection with the UMTS / LTE n etwork
in the documentation f or the hardware used.
Your device can connect to the Internet via UMTS / LTE. To do this, use one
of the following types of connection:
• Integrated UMT S / LTE module (availability dependent on your model variant)
•aUSBd
ongle (a USB stick with your mobile phone provider’s SIM card)
• a mobile end-device (e.g. m obile phone with Bluetooth or cable connection)
Fujitsu 45