Operation Manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q584
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Battery charging indicator
- Switching on the Tablet PC
- Switching off the Tablet PC
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the stylus pen
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN/Bluetooth/UMTS/LTE/NFC radio components
- Ethernet and LAN (only with Multi-functional Cradle)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery indicator does not illuminate
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised
- SmartCard PIN forgotten
- User and/or supervisor SmartCard lost
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Working with the Tablet PC
Webcam
Webcam
Your device has two WebCams: one on the front side of the device and one on the rear.
The WebCam has its own statu
s indicator. The indicator lights up when the WebCam is switched on.
Depending on the software
used, you can use your Webcam to take picture s,
record video clips or take
part in web ch ats.
• The picture quality depe
nds on the lighting conditions and the softw are being used.
• You can only ope rate the webcam with a particular application ( e.g. an Internet telephony
program or a video conferencing program which supports a webcam).
• When using the webcam th
e Tablet PC support must not wobble.
• The webcam automatically a djusts itself to the current light level. For this reason
the touchscreen may flicker while the light level is adjusted.
Further information on using the webcam and on the additional settings
which are possible for yo ur webcam can be found in the help function
of the program which uses the webcam.
If you would like to perform a function te st of your webcam, suita ble test software
is available at "
http://www.fujitsu.com/fts/suppo r t/index.htm".
38 Fujitsu