Operation Manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q584
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Battery charging indicator
- Switching on the Tablet PC
- Switching off the Tablet PC
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the stylus pen
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN/Bluetooth/UMTS/LTE/NFC radio components
- Ethernet and LAN (only with Multi-functional Cradle)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery indicator does not illuminate
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised
- SmartCard PIN forgotten
- User and/or supervisor SmartCard lost
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Important notes
Wa tertight/dust-protected (device-dependent)
Depending on your configuration, your Tablet PC is watertight in accord ance with
IPX5 / IPX8 an d dust-prot ecte d in accordance with IP5X. The slot covers, however,
must be securely sealed in the event of contact with wa ter or dust.
Protection class IPX5 stipulates that the tablet can be operated normally after it has been sprayed
with w ater for at least 3 minutes through an opening of 6 .3 mm / 0.25" diameter and a flow
rate of 12.5 l water per minute at a distance of approximately 3 m / 118.11".
Protection class IPX8 stipulates that your Tablet PC can be operated normally after it has been
submerged in tap water for 3 0 minutes at room temperature and at a depth o f 1.5 m / 59.05".
Protection class IP5X stipulates that the Tablet PC can be left in an environment with dust
particles of up to 75 μm diameter for 8 hours and can then still be operated safely.
To ensure that the device remains watertight and dust -protect ed, the interface and DC
IN covers must always remain sealed. Chapters "
SIM card", Page 43 and "Memory
cards", Page 41 describe how ports can be opened and securely sealed again.
Otherwise, w ater could penetrate the Tablet PC and cause a malfunction.
Ensure that water in the headphones and microphone area is wiped away
immediately, or else a malfunction or electric shock could occu r.
If the Tablet PC comes into contact with salt water, soft drinks or
sludge, it must be cleaned immediately.
Fujitsu 15