Instruction Manual

Tro ubl eshooting and tips
Stylus input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which can only be
operated using the stylus, install the driver
for the standard model.
or
► If your device is one which can be
operated using the stylus and by finger,
install the drive r for the "Dual Digitizer"
model.
The Tablet PC does not start after switch on
TabletPC
Cause Troubleshooting
The battery is discharged.
► Charge the battery.
or
► Connect th e AC adapter to the Tablet
PC.
The AC adapter is not properly connected. ► Check whether the AC adapter is properly
connected to the Tablet PC.
► Switch the Tabl
et PC on.
The Tablet PC stops working
TabletPCEnding
Cause Troubleshooting
The Tablet PC is in energy saving mode.
► End energy saving mode.
An application program has cau sed the
malfunction.
► Close the application program or restart
the Tablet PC (by restarting the operating
system or switching the device off and back
on again).
The battery is discharged.
► Charge the battery.
or
► Connect th e AC adapter to the Tablet
PC.
Fujitsu 73