Instruction Manual

Connecting e xternal devices
Connecting USB devices
USBports
With the USB ports you can connect external devices that also have a USB p ort
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-swappable. This means you can connect and disconnect the
cables of USB devices while the operating system is running.
USB 1.x has a maximum data tran sfer rate of 12 Mbps.
USB 2.0 has a data transfer rate of up to 480 M bps.
USB 3.0 has a data transfer rate of up to 5 Gbps.
Additional information can be found in the d ocumentation for the USB devices.
+
► Connect the dat
a c able to the exte rnal device.
► Connect the data cable to a USB port (Tablet PC or docking cradle) or
micro USB port (only on Tablet PC).
Device drivers
USB devices will be automatically recognized and installed b y your operating system.
For optional micro USB a ccessories (cables), see chapter "
Micro USB adapters", Page 54.
How to remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
► Tap the symbol for safe removal of the hardware.
► Select the device y ou wish to shut down and remove.
► Ta p OK.

Wait for the dialog box which tells you that it is now safe to remove the device.
Fujitsu 65