Instruction Manual

Working with the Tablet PC
Replacing the stylus tip
With use, the stylus tip may become worn or may pick up foreign particles that can scratch the screen.
A damaged or worn tip may not move freely, causing unpred ictable results when using the stylus.
If your stylus exhibits these problems, re place the stylus tip. To do this, use the supplied tool (1).
1
► To remove the tip, position it in the gap
between the two ends of the tool supplied.
► Pinch the two ends of the supplied tool
together so that the tip is firmly clasped,
then pu ll it fro m the barrel.
► Replace the tip with one of the new tips
that we re supplied w ith your stylus. Insert
the flat end of the tip into the barrel
and exerting gent le pressure, push it
in until it is firmly in place.
If the tip is worn or damaged, discard it.
Installing a stylus tether
Attach the stylus w ith a stylus tether to prevent accidentally dropping it or losing it.
► Fasten the stylus te ther to the stylus eyelet and to the eyelet o n the Tablet PC.
Fujitsu 33