Operation Manual

Troubleshooting and tips
Pen input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which can only be
operated using the pen, install the driver for
the standard model.
or
► If your device is one which c
an be
operated using th e pen and
by finger,
install the driver for the
"Dual Digitizer"
model.
The Tablet PC does not start after switch on
TheTabletPC
Cause Troubleshooting
The bat tery is not installed correctly.
► Check whether the battery is installed
correctly in its compartment.
► Switch on the Tablet PC.
The battery is dead.
► Charg e the battery
.
or
► Insert a charged battery.
or
► Connect the mains adapter to the Tablet
PC.
The power adapter is not connected correctly.
► Check whethe r th e mains adapter is
connected correctly to the Tablet P C .
► Switch on the Tablet PC.
The Tablet P
Cstopsworking
TheTable
tPC
Energysa
vingmode
Cause Troublesho
oting
The Tablet PC is in energy saving mode.
► Leave ener
gy saving mode.
An application programme has caused the
malfunction.
► Close the application program or restart
the Tablet PC (by restarting the operating
system or switching the device off and back
on again).
The battery is dead.
► Charg e
the battery.
or
► Insert a charged battery.
or
► Connect the mains adapter to the Tablet
PC.
Fujitsu 71