Operation Manual

Security functions
Using the Security Lock
SecurityLockAnti-theftprotectionSecurityLock
Your device comes with a Security Lock m echanism for the Kensington Lock Cable. W ith
the Kensington Lock Cable, a sturdy steel cable, you can protect your device and your Port
Replicator from theft. The Kensington Lock Cable is a vailable as an accessory.
► Fit the Kensington Lock Cable to the
corresponding device on your equipment.
Configuring password protection in BIOS Setup Utility
Before using the various options for password protection in the BIOS Setup utility
to increase data security, please observe the following:
Make a note o f the passwords and keep them in a safe place. If you forget your
supervisor password you will not be able to access your Tab let PC. Deletion of the
password is not covered by your warranty and a charge will be made for assistance.
Password prot
ection
Your password can be up to eight characters long and co ntain letters and numbers.
No distinction is made between uppercase and lowercase.
Protecting BIOS Setu p Utility (supervisor and user password)
If you have opened these operating instructions on the screen , we
recommend th at you print them ou t. You cannot call the instructions onto
the screen while you are setting up the passw ord.
BIOSSetupUtility
The super
visor password and the user password both prevent unauthorised use of the BIOS Setup
Utility
. With the aid of the supervisor password you can access all of the functions of the BIOS
Setup Ut
ility, while the user password will only give you access to some of the functions. You
can only
set up a user password if a supervisor password has already been assigned.
Please
refer to section "
Settings in BIO S Setup Utility", Page 66 for a description
of how t
o call up and operate the BIOS-Setup-Utility.
56 Fujitsu