Operation Manual

Accessories for yo ur Tablet P C (opti
onal)
Hand strap (optional)
The hand strap kit includes the following parts: Hand strap, two M2x6
screws, two M2x8 screws and two spacers.
• Use a suitable tool of the correct size wh en fitting the screws.
• Keep the screws out of the reach of children.
• Do not shake the device too much when you ho ld it by the hand
strap, otherwise it could fall down.
1
1
2
2
4
3
4
► R emove the caps from the scre wholes on the back side of the Tablet PC (1).
► Put the spacers between the Tablet PC and the hand strap (2).
► Position the hand strap on the Tablet PC (3). Make sure that the screw holes of the
hand strap and of the Tablet PC line up exactly above one a nother.
50 Fujitsu