Operating Manual

Security functions

Using the Security Lock

SecurityLockAnti-theftprotectionSecurityLock

Your device comes with a Security Lock device for the Kensington Lock Cable. W ith the

Kensington Lock Cable, a sturdy steel cable, you can protect y our device and the port replicator

against theft. The Kensington Lo ck Cable is available as an accessory.

► Fit the Kensington Lock Cable to the

corresponding mechanism on your device.

Conﬁguring password protection in B IOS Setup Utility

Before using the various options for password protection in the BIOS Setup

Utility, please proceed as follows to increase data security:

Make a note of the passwords and keep them in a safe pla ce. If you forget your

supervisor passwo rd you will not be able to access your Tablet PC. Passwords are

not covered by your warranty and a charge will be made for assistance.

Password prot

ection

Your password can be up to 32 characters long and can contain letters and

numbers. No distinction is made between uppercase and lowercase.

Protecting BIOS Setup Utility (supervisor password

and user password)

If you have opened these o perating instructions on the screen, we recommend

that you print them out. You cannot call up the instructions on th e screen

while you are setting up the password.

BIOSSe

tupUtility

The supervisor password and the user password both prevent unauthorized use of the BIOS

Setup Utility . The supervisor password allows you t o access all of the functions of the BIOS Setup

Utility, while the user password will only give you access to some of the functions. You can

only set up a user password if a supervisor password has already been assigned.

Calling and using the BIOS Setup Utility is described in the chapter

Settings in BIOS Setup Utility", Page 65.

56 Fujitsu