Instruction Manual

24 - Active Digitizer/Touchscreen
Right-Clicking on Active Digitizer
Right-click can be accomplished by holding the front of
the toggle button down while tapping on the screen. To
change the settings for the right-click feature, go to Start
-> Control Panel -> Pen and Touch. In the Pen Options tab,
select “Press and Hold” then click the [Settings] button.
Figure 8. Right-clicking Active Digitizer
• DO NOT USE EXCESSIVE FORCE WHEN TAPPING OR WRITING ON THE SCREEN WITH THE STYLUS. EXCESSIVE FORCE COULD RESULT IN DAMAGE TO
THE LED AND/OR ACTIVE DIGITIZER.
• TO PURCHASE ADDITIONAL OR REPLACEMENT STYLUSES, VISIT THE FUJITSU ACCESSORIES WEBSITE AT: WWW.SHOPFUJITSU.COM.
Double-Clicking
To double-click, touch the item twice, and then
immediately remove the stylus tip.
Figure 9. Double-clicking the Display