Operation Manual
Table Of Contents
- STYLISTIC Q550
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching off the Tablet PC
- Handwriting recognition under Windows 7
- Touchscreen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the stylus pen
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN / Bluetooth / UMTS
- GPS
- Your Cradle (optional)
- Security functions
- Configuring the fingerprint sensor
- Configuring password protection in BIOS Setup Utility
- SmartCard reader
- Trusted Platform Module (TPM) (device-dependent)
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The Tablet PC’s date or time is incorrect
- Battery indicator does not illuminate
- The Tablet PC’s touchscreen remains dark
- The display on the Tablet PC’s touchscreen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised
- SmartCard PIN forgotten
- SmartCard lost
- User and/or supervisor SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Troubleshooting and tips
The Tablet PC stops working
TheTabletPCEnergysaving mode
Cause Troubleshooting
The Tablet PC is in energy saving mode.
► Leave energy saving mode.
An application programme ha s caused the
malfunction.
► Close the application progr
am or resta rt
the Tablet PC (by re starting
the operating
system or switching the devi
ce off and ba ck
on again).
The battery is dead.
► Charge the battery.
or
► Insert a c harge d batter
y.
or
► Connect the mains a dapter to the Tablet
PC.
The printer does not print
Printerdoesnot p
rint
Cause Troubleshooting
The printer is not sw itched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the p rinter).
The printer is not connected correctly.
► Check that the data cable conn ecting
the Table PC to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
► Check that the data cable conn ecting
the Tablet PC to the printer is properly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
The radio connection to a network does not work
Theradi
oconnection toanetwo rkdoesnot work
Cause Troubleshooting
The wireless component is disabled.
► Switch the radio component on (see
"
Switch ing the wireless compone nts on and
off", Page 4 8).
The wireless comp onent is enabled. D esp ite
this, the wireless connection to a network does
not work.
► Check whether the radio connection is
switched on via the software.
► Further informa tion on using the radio
component can be fou nd in the help files.
72 Fujitsu Technology Solutions