Operation Manual
Table Of Contents
- STYLISTIC Q550
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching off the Tablet PC
- Handwriting recognition under Windows 7
- Touchscreen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the stylus pen
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN / Bluetooth / UMTS
- GPS
- Your Cradle (optional)
- Security functions
- Configuring the fingerprint sensor
- Configuring password protection in BIOS Setup Utility
- SmartCard reader
- Trusted Platform Module (TPM) (device-dependent)
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The Tablet PC’s date or time is incorrect
- Battery indicator does not illuminate
- The Tablet PC’s touchscreen remains dark
- The display on the Tablet PC’s touchscreen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised
- SmartCard PIN forgotten
- SmartCard lost
- User and/or supervisor SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Connecting external devices
Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"
Important notes", Page 11 chapter before connecting or disconnecting
any devices to or from your Tablet PC.
Always read the documentation supplied with the device you w ish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Adhere to the order de scribed below when you connect ext ernal devices
to the Tablet PC or sep arate them from it:
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device befo re connecting/disconnecting. For m ore
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
Connecting devices to the Tablet PC
1. Switch off the Tablet PC and all external devices.
2. Remove the mai
ns plug for the Tablet PC and all relevant devices from the sockets.
3. Connect the cables for your external devices following th e instructions.
4. Plug all powe
r cables into the mains sockets.
DevicesPeripheralde
vices
Disconnecting devices from the Tablet PC
1. Switch off the Tablet PC and all external devices.
2. Remove the
mains plug for the Tablet PC and all relevant devices fro m the sockets.
3. Disconnect the cables for your external devices following the instructions.
DevicesPeripheraldevices
Fujitsu Technology Solutions 61