Operation Manual
Table Of Contents
- STYLISTIC Q550
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching off the Tablet PC
- Handwriting recognition under Windows 7
- Touchscreen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the stylus pen
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN / Bluetooth / UMTS
- GPS
- Your Cradle (optional)
- Security functions
- Configuring the fingerprint sensor
- Configuring password protection in BIOS Setup Utility
- SmartCard reader
- Trusted Platform Module (TPM) (device-dependent)
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The Tablet PC’s date or time is incorrect
- Battery indicator does not illuminate
- The Tablet PC’s touchscreen remains dark
- The display on the Tablet PC’s touchscreen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised
- SmartCard PIN forgotten
- SmartCard lost
- User and/or supervisor SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Security functions
Password protection for the hard disk
Passwordprotect ion:
The h a d disk password prevents unauthorised access to the hard disk drives
and is checked intern ally each t ime the system is booted. The condition for this
is that you have assigned at least the supervisor password.
Activating hard disk protection
► Call up the BIOS Setup and select the Security menu.
If you have not assigned BIOS passwords yet, define the supervisor and the user
password now, if desired (see "
Securit y functions", Page 54 ).
► Mark the Hard Disk Security field and press the Enter key.
► In the Drive0 area ma rk the Set Master Password field and press the Enter key.
Enter new Password then ap pears and you are asked to enter a password.
► Enter the password and press the Enter key.
Confirm ne w Password requires you to con firm the password.
► Enter the password again and press the Enter key.
Setup Notice: Changes hav e been saved is displayed to confirm that the
new passwo rd has been saved.
► To assign the password for the second hard disk (Drive1), go to the Drive1 area and
select the field Set Master Password, then proceed in exactly the same way as f or
setting up the password for the first hard disk (Drive0).
The field Password Entry on Boot i s set to Enabled by default. You can exit the BIOS
Setup once you have finished changing the settings.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key a nd select Yes.
The Tab le PC reboots and your hard disk is now protected with a p a ssword. The
password prompt is enabled as soon as the Tablet PC has rebooted.
Deactivating hard disk protection
To cancel a password without setting a new one, proceed as follows:
► Call up the BIOS Setup and select the Security menu.
► Mark the Hard Disk Security field and press the Enter key.
► In the Drive0 area ma rk the Set Master Password field and press the Enter key.
You will be initially requested to enter t he old password by the Enter current Password prompt.
You will then be requested to enter a new password by the Enter new Password prompt.
► After entering the password, press the Enter key three times.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key a nd select Yes.
The Tablet PC reboots and there is no longer any password protection for this hard disk.
► To cancel the password for the second hard disk (Drive1), go to the Drive1 area
and select the field Set Master Password, then proceed in exactly the same way as
for c ance lling the password for the first hard disk (Drive0).
58 Fujitsu Technology Solutions