Operation Manual
Table Of Contents
- STYLISTIC Q550
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching off the Tablet PC
- Handwriting recognition under Windows 7
- Touchscreen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the stylus pen
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN / Bluetooth / UMTS
- GPS
- Your Cradle (optional)
- Security functions
- Configuring the fingerprint sensor
- Configuring password protection in BIOS Setup Utility
- SmartCard reader
- Trusted Platform Module (TPM) (device-dependent)
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The Tablet PC’s date or time is incorrect
- Battery indicator does not illuminate
- The Tablet PC’s touchscreen remains dark
- The display on the Tablet PC’s touchscreen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised
- SmartCard PIN forgotten
- SmartCard lost
- User and/or supervisor SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Working with the Tablet PC
Battery capacity d isplay
You can check the charge sta tus directly on the battery itself.
► Remov e the batte ry (see "
Removing and installing the battery", Page 40).
PUSH
1
a
► Press the test key (1).
The LED (a) lights up in one of the following colours:
LED indicator
State o f charge
Green The battery
is between 50 % and 100 %
charged.
Orange The battery is between 10 % and 49 % charged.
Red
The battery is betwee n 1 % and 10 % charg ed.
LED not lit
The batte
ry is fully discharged.
Fujitsu Technology Solutions 43