Operation Manual
Table Of Contents
- STYLISTIC Q550
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching off the Tablet PC
- Handwriting recognition under Windows 7
- Touchscreen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the stylus pen
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN / Bluetooth / UMTS
- GPS
- Your Cradle (optional)
- Security functions
- Configuring the fingerprint sensor
- Configuring password protection in BIOS Setup Utility
- SmartCard reader
- Trusted Platform Module (TPM) (device-dependent)
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The Tablet PC’s date or time is incorrect
- Battery indicator does not illuminate
- The Tablet PC’s touchscreen remains dark
- The display on the Tablet PC’s touchscreen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised
- SmartCard PIN forgotten
- SmartCard lost
- User and/or supervisor SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
On devices with ON/OFF switch for wireless components: Slide t he ON/OFF switch
for wireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software is
installed and con figured. Because this pro cedure must not be interrupted,
you should se t aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you a re requested to do so!
To make it easier to use y
our device for the first time, the operating system
is pre-installed on th
e hard disk.
1
2
► Slide the ON/OFF switch (1) to the rig ht to switch on the Tablet PC.
The ON/OFF switch returns automatically to its original position.
The power-on indicator (2) lights up whenever the system is switched on.
► During installation, follow the instructions on screen.
If a Windows operating system is installed on your device, you will find more
information on the system and drivers, help programmes, updates, manuals etc.
on the device or o n the Internet at "
http://ts.fujitsu.com/support".
Fujitsu Technology Solutions 19