Instruction Manual

46 - Lithium Polymer Battery
Recharging the Batteries
If you want to know the condition of the primary Lithium Polymer battery, check the Battery Level
indicator located on the Status Indicator panel. The indicator changes as the battery level changes.
The Lithium Polymer battery is recharged internally using the AC adapter or Auto/Airline adapter. To
recharge the battery make sure the battery that needs to be charged is installed in your STYLISTIC Tablet
PC and connect the AC or Auto/Airline adapter.
There is no memory effect on the Lithium Polymer battery therefore you do not need to discharge the
battery completely before recharging. The charge times will be significantly longer if your Tablet PC is in
use while the battery is charging. If you want to charge the battery more quickly, put your Tablet PC into
Sleep mode, or turn it off while the adapter is charging the battery. (See Power Management on page 41
for more information on Sleep mode and shutdown procedure)
• ACTUAL BATTERY LIFE WILL VARY BASED ON SCREEN BRIGHTNESS, APPLICATIONS, FEATURES, POWER
MANAGEMENT SETTINGS, BATTERY CONDITION AND OTHER CUSTOMER PREFERENCES. HARD DRIVE
USAGE MAY ALSO HAVE A SIGNIFICANT IMPACT ON BATTERY LIFE. THE BATTERY CHARGING CAPACITY IS
REDUCED AS THE BATTERY AGES. IF YOUR BATTERY IS RUNNING LOW QUICKLY, YOU SHOULD REPLACE
IT WITH A NEW ONE.
• UNDER FEDERAL, STATE, OR LOCAL LAW IT MAY BE ILLEGAL TO DISPOSE OF BATTERIES BY PUTTING
THEM IN THE TRASH. PLEASE TAKE CARE OF OUR ENVIRONMENT AND DISPOSE OF BATTERIES
PROPERLY. CHECK WITH YOUR LOCAL GOVERNMENT AUTHORITY FOR DETAILS REGARDING RECYCLING
OR DISPOSING OF OLD BATTERIES. IF YOU CANNOT FIND THIS INFORMATION ELSEWHERE, CONTACT
YOUR SUPPORT REPRESENTATIVE AT 1-800-8FUJITSU (1-800-838-5487)
M
AKE SURE THAT THE PERCENTAGE CHARGE IS INDICATED BY THE BATTERY CHARGING INDICATOR ON
THE STATUS INDICATOR PANEL.