User manual

Technical data
WLAN specifications
Type of network Intel® Dual Band Wireless-AC 7265 2x2
ac/a/b/g/b/n with integrated Bluetooth v4.0,
WI-Fi based*
2.4 GHz min. 2412, max. 2472
5.8 GHz min. 5180, max. 5825
Transfer rate (Automatic switching) IEEE802.11 a and g: 54
Mbps max. data rate; IEEE802.11n: 300 Mbps
max. data rate, IEEE802.11ac: 867 Mbp s max.
data rate
Active frequency • 802.11n: 2.4 GHz / 5 G Hz
• 802.11b/g: 2400~2473 MHz
• 802.11a. 4900 ~5850 M
Hz
Number of channels
• 802.11a: 8 indepen
dent channels
• 802.11b/g: 11 channels, 3 non-o verlapping
channels
• 802.11n: Channel
bonding takes two of
the non-overlapp
ing 20 M Hz channels and
combines them in
to one 40 MHz chann el. It
is actu ally 12 no
n-overlapping channels with
channel bo nding
and 24 without. Also it is 1
non-overlapp
ing c hannel in 2.4GHz when
channel bondi
ng is used.
• 802.11ac: 5 independ ent chan nels
Security
Encryption types: compatible with WEP, TKIP,
AES***, WPA 1.0 and WPA 2.0
Encryption key, lengths supported: 64 bits and
128 bits
Maximum recommended number of computers
to be connected over w ireless LAN (during ad
hoc connection)
10 units or less ****
* “Wi-Fi based” indicates that the interconnectivity test of the organ ization w hich guarantees th e
interconnectivity of wireless LANs (Wi-Fi Alliance) was passed.
** The operating distances g iven above increase or decrease depending on factors such as the
number of walls, reflecting material or interference by external RF sources.
*** Network ke y encryption (WE P) o ccurs with th e numb er of bits given above, after deduction of
the fixed length of 24 bits the user may however also set 40 or 10 4 bits.
**** Depending on the particular p ractical application, the number of computers which can be
networked is reduced if necessary.
84 Fujitsu