User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q5010
 - Contents
 - Innovative technology
 - Ports and controls
 - Important notes
 - First-time setup of your device
 - Working with the Tablet PC
- Status indicators
 - Switching on the Tablet PC
 - Switching the Tablet PC off
 - Handwriting recognition
 - Touch screen
 - Select display orientation (portrait or landscape orientation)
 - Use the touch screen
 - Tablet buttons
 - Camera
 - Rechargeable battery
 - Using the power-management features
 - Memory cards
 - SIM card (configuration dependent)
 - Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
 - Ethernet and LAN (optional, only with cradle, keyboard dock or adapter cable)
 - GPS
 
 - Accessories for your Tablet PC (optional)
 - Security functions
 - Connecting external devices
 - Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
 - Operating the BIOS Setup Utility
 - Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
 - Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
 - Load Setup Defaults – Copy Standard Entries
 - Discard Changes – Discard changes without exiting the BIOS Setup Utility
 - Save Changes - save changes without exiting the BIOS Setup Utility
 - Save Changes and Power Off
 
 
 - Troubleshooting and tips
- Executing a reset
 - Help if problems occur
 - The Tablet PC's date or time is incorrect
 - Battery charging indicator not lit
 - The Tablet PC's touchscreen remains dark
 - The display on the Tablet PC's touchscreen is difficult to read.
 - The external monitor remains blank
 - The external monitor is blank or the image is unstable
 - The cursor does not correctly follow the pen movements
 - The Tablet PC does not start after switch on
 - The Tablet PC stops working
 - The printer does not print
 - The wireless connection to a network does not work
 - The battery discharges too quickly
 - Acoustic warnings
 - Error messages on the screen
 - Restoring the system under Windows€10
 
 - Technical data
 - Manufacturer’s notes
 - Index
 
Troubleshooting and tips
The battery discharges too quic
kly
Battery:
Cause
Troubleshooting
The battery is either too hot or
too cold. In this
case the battery indicator flas
hes.
► Bring the Tablet PC up/down to a normal
temperature again.
► If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace batt ery if necessary.
You may have an application running that
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.
► Use the mains adapte r as frequently as
possible.
The maximum brightness may have been set
for the screen.
► Reduce the brightness of the screen to
lower energy consumption: You will find the
setting u nder Control Panel – Hardware and
Sounds – Windows Mobility Cen ter.
Acoustic warnings
Acousticerror me
ssages
Errors
Cause
Troubleshooting
A beep sounds every few seconds.
The battery is almost flat.
► Charg e the battery.
Error messages on the screen
Errormessag
esonthe screen
Errormessag
e:
This section describes the error messages generated by the BIOS Setup. Error messages displayed
by the operating system or programmes are described in the r elevan t documentation.
If the error message appears repeatedly, despite troubleshooting measures, please
contact the place of purchase or our customer service centre.
Fujitsu 73










