Operation Manual

First-time setup of your device
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important note s", Page 11.
The necessary hardware drive rs and the supplied software for the
device are a lready pre-installed.
Before you switch on the device for the first time, conn ect it to the mains voltage
using the mains adapter, see "
Mains adapter connecting", Page 19.Themains
adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various m essages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER s witch off your device during the first-time setup process.
The battery is permanently installed in th e system and m ust be charged if you
want to use your device under battery opera tion.
When used on the m ove, the built-in battery provides th e device with the necessary powe r. You
can increase the operating time by using the available energy-saving fu nctions.
Please refer to chapter "
Connecting external devices", Page 67 for instructions on how to
connect external devices (e.g. mouse, flash storage) to your device.
Unpacking and
checking the d evice
Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
► U npack all the individual parts.
PackagingTransport
► C heck your
device for any visible damage which may have occurred during transportation.
You m ay ne
ed the packaging in the future, if you need to transport your device.
18 Fujitsu