Operating Manual

Working w it h Android
Establishing a Bluetooth connection
► From All apps, select the option Settings.
► Slide the sw itch t o ON to enable B luetooth.

A list of the available Bluetooth devices in your vicinity is displayed.
When you use a new Bluetooth device fo r the first time, the two devices must be
"paired" so that a secure connection can be made. Afterwards, the devices automat ically
create a connection. The devices stay paired until you cancel the connection.
► U nder Settings, select the Bluetooth option.

Your device search es for Bluetooth devices within range and shows them.
► Select the device with which you w ish to connect your Tablet PC and follow the instructions.
Bluetooth can result in reception interference. W-LAN ( IEEE802.11b/g/n) and Bluetooth
use the same frequency band (2.4 GHz). If you use the Tablet PC with WLAN and
Bluetooth at the same time, reception i nterfere nce may occur and the transmission
speed will fall. In addition, you ma y hear a noise or be unable to establish a connection.
Even if you are o nly using the WL AN function of the Tablet PC, the same problem may
occur if somebody is using a Bluetooth device nearby. Proceed as follows in this case :
Hold the Tablet PC more than 10 m away from the Bluetooth devices. – Disable the
Bluetooth function if you are using the Tablet PC at a d istance of less than 10 m.
Limiting data volumes for mobile data use
You can give yo
ur mobile data use a limit, so th at the mobile netw ork switches
off when the da
ta volume is reached.
► From All apps
, select the option Settings.
► Select Wireless and Networks – Next... – Data transfer.

The previou
s data volume usage w ill be shown. You can specify a limit for mobile data.
54 Fujitsu