Operating Manual

Working with the Tablet PC
Switching the wireless components on and off
WLAN/Wi-Fi and Bluetooth
► Select Settings.
► Set the switch for WLAN/Wi-
Fi or Bluetooth to ON.
► Click on WLAN/Wi-Fi an d select your preferred network.
► Click on Bluetooth and se
lect the Bluetooth device with which you would
like to connect your Tab
let PC.
Pay attention to the add
itional safety notes for devices w ith radio components
provided in the "Safet
y/Regulations" manual.
Registration in a WL
AN/Wi-Fi network
If your wireless access point (router) supports AOSS™ or WPS, you can easily
connect to your WLAN/Wi-Fi network.
► Go to All Apps, s elect Settings – Simple WL AN Reg istration an d choose AOSS
System or WPS System accordingly.
► If you choose the
AOSS System, press the AO S S button at the access point.
or
► If you choose the WPS System, check which of the following me thods is supported
by your access point, and make the relevant settings.
• Button system (automatic registration by pressing a button at the access point)
• PIN input system, eight-digit (automatic registration through input of a randomly
generated, eight-digit PIN at the access point)
• PIN input system, four-digit (automatic registration through input of a randomly
generated, four-digit PIN at the access point)
At some wireless access points, it is not possible to establish an AOSS™ connection.
Use WPS if the connection fails, or establish the connection manually.
If the security function at the access point is set t o WEP, yo u cannot
establish a connection via WPS.
In the AOSS™ system, only frequency 2.4 GH z is supported.
UMTS / LTE
► Select Settings - Next... - Mobile Networks.
► C hoose yo ur preferred netwo rk.
30 Fujitsu