Operating Manual

First-time setup of your d evice
Selecting a location
SelectingalocationDeviceMains adapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapt er on a heat-se nsitive surface.
The surface could be damaged as a resu lt.
• The underside of the device heats up during normal operation. Prolonged contact
with the skin may b ecome unp leasant or even result in burns.
• Keep other objects at least 100 mm away from the device a nd its
mains adapter to ensure adequate ventilation.
• Do not expose the device to extreme environmental conditions. Protect
the device against dust, humidity and hea t.
Mains adapter connecting
Preparingforo pera
tion
Mainsadapter
Observe the safety n
otes in the enclosed "Safety/R egulations" manual.
The supplied power
cable c onfo rms to the requirements of the country in
which you purchase
d your device. Make sure that the power cable is ap proved
for use in the coun
try in which you intend to use it.
► Insert the connector in the mains adapter
approved for the country of use. Connect the
cable to the base station (see "
Connecting
the Tablet PC to the Cradle", Page 35).
or
► Co nnect the mi
croUSBcabletoa
standard mai
ns adapter with USB
socket and co
nnect the mains adapter
to a power soc
ket.
or
► Co nnect the micro USB cable to
a notebook or PC and switch on
the notebook or PC.
Fujitsu 19