Operation Manual

Working w ith A ndroid
Updating via an external memory card (micro SD card)
► Open the Internet browser on your Tablet PC or an other computer.
► Navigate to "
http://support.ts.fujitsu.com/".
► Select Drivers & Downloads.
► Search fo r your Tablet PC in the list of devices.
► Download the system update package.
► Copy this system update p ackage onto an external m emory card (micro SD card).
► Slide the m emory card (micro SD card) into your Tablet PC.
► Switch your Tablet PC off by one long press of the ON/OFF switch and
confirm the question on the shut down with OK.
► Switch your Tablet PC on again.
► When you see the Android logo on the screen, pre ss the ON/OFF switch and the volume button
(increase volume) and keep them pressed for 2 seconds and then release them.

After a few seconds you reach the restore mode.
If the Fujitsu logo appears on the screen, then you have not reached the restore
mode. Repeat the above step until you r each the restore mode.
► Select Apply update from external storage.
Navigate as follows th rough the menu:
• Volume button (increase volume) to select an option above the current option
• Volume button (decrease volu me) to select an option below the c urrent option
• ON/OFF switch to confirm the selection
► Follow the instructions on the screen to perform the system upd ate.

After the system update has comp leted, yo u will be in the restore mode again.
► Select Reboot system now to fin ish the system update.
Fujitsu 55